| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall large table dimensions | 800 x 800 x 500 mm | |
|---|---|---|
| Overall small table dimensions | 700 x 700 x 450 mm | |
| Tabletop thickness (large table) | 19 mm | |
| Tabletop thickness (small table) | 19 mm | |
| Gold metal edge trim width | 30 mm | |
| Large plinth base footprint | 500 x 500 mm | |
| Small plinth base footprint | 420 x 420 mm | |
| Nesting overlap depth | 300 mm | |
| Floor clearance under tabletop edge | 100 mm | |
| Tabletop corner radius | 20 mm | |
| Gold plinth wall thickness | 1.2 mm | |
| Nested combined footprint (stored) | 800 x 1050 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Large table total weight | 42 kg | |
|---|---|---|
| Small table total weight | 32 kg | |
| Large table distributed static load capacity | 100 kg | |
| Tabletop surface stain resistance rating | Grade 4 | |
| Gold finish abrasion cycle count | 1000 cycles | |
| Recommended maximum place setting capacity | 4 place settings | |
| Base static stability tilt threshold | 15 degrees | |
| Stone top heat resistance | 120 °C | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table tabletop | Polished white artificial sintered stone slab with smooth low-sheen finish | |
|---|---|---|
| Small table tabletop | Polished white artificial sintered stone slab with smooth low-sheen finish | |
| Tabletop edge trim | Brushed gold 304 stainless steel trim wrapped around perimeter edge | |
| Large table support plinth | Brushed gold finished 1.2mm thick stainless steel hollow central block base | |
| Small table support plinth | Brushed gold finished 1.2mm thick stainless steel hollow central block base | |
| Base bottom protective pads | 3mm thick non-slip rubber pads affixed to plinth bottom corners | |
| Tabletop to base connection | M8 steel mounting bolts with anti-loosening washers, 4 bolts per table | |
| Surface finish (metal parts) | Brushed PVD gold plated finish with anti-tarnish clear top coat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Smaller table slides partially under the larger table to reduce occupied floor space by 37% | |
|---|---|---|
| Surface use function | Flat polished top supports placement of drinks, decor, books and serving trays for living room use | |
| Independent use function | Each table functions as a standalone low coffee table when separated for flexible seating arrangements | |
| Floor protection function | Rubber base pads prevent scratches to hard floor surfaces and eliminate sliding during use | |
| Surface cleaning function | Non-porous polished top allows wet wiping with common household cleaners without staining | |
| Assembly function | Tabletop attaches to pre-finished plinth base via included hardware with no on-site drilling required | |
| Arrangement flexibility function | Tables can be positioned side-by-side, offset at angles, or fully nested to adapt to different room layouts | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room application | Placement in front of sofas or sectionals for serving drinks, displaying decor and daily use | |
|---|---|---|
| Small apartment space application | Nested configuration reduces floor space for compact living areas and studio apartments | |
| Luxury modern interior application | Matches contemporary, glam, minimalist and light luxury interior design schemes | |
| Lounge waiting area application | Use in high-end residential lobbies, boutique hotel lounge areas for guest use | |
| Recommended seating pairings | Pairs with 3seat upholstered sofas, modular sectionals and fabric accent chairs | |
| Surface use recommendation | Supports table lamps, flower vases, coffee table books and snack serving trays without overhang |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 15185:2006 | Assessment of surface resistance to abrasion for furniture surfaces | |
| EN 15186:2006 | Assessment of surface resistance to scratching for furniture surfaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements applicable to domestic wooden and stone-topped furniture | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances applicable to interior decoration wood furniture | |
| GB/T 4893.9-2013 | Surface abrasion resistance test method applicable to furniture finishes |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements applicable to domestic wooden and stone-topped furniture; 2. GB 18584-2001: Limit of harmful substances applicable to interior decoration wood furniture; 3. GB/T 4893.9-2013: Surface abrasion resistance test method applicable to furniture finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
