| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (adjacent arrangement) | 1300 x 800 x 480 mm | |
|---|---|---|
| Large low coffee table dimensions | 800 mm diameter x 300 mm height | |
| Small tall side table dimensions | 500 mm diameter x 480 mm height | |
| Tabletop thickness | 30 mm | |
| Body wrap wall thickness | 20 mm | |
| Black edge trim width | 10 mm | |
| Decorative lace-up stitch strip width | 30 mm | |
| Lace-up stitch gap between body panels | 10 mm | |
| Floor clearance under tables | 5 mm | |
| Top surface usable area (large table) | 5026 cm² | |
| Top surface usable area (small table) | 1963 cm² | |
| Nesting clearance under large table for small table | 0 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 50 kg | |
|---|---|---|
| Large table static distributed load capacity | 100 kg | |
| Leather surface abrasion resistance (Martindale) | 50000 cycles | |
| Seam stitch pull strength | 120 N | |
| Recommended maximum number of users for shared use | 4 | |
| Surface finish scratch resistance (pencil hardness) | H | |
| Warranty period for structural components | 24 months | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| External body wrap | 1.2 mm thick saddle/faux leather with matte finish | |
|---|---|---|
| Tabletop surface | Leather-wrapped rigid panel with black edge trim | |
| Internal structural core | 18 mm thick high-density MDF/particleboard frame | |
| Decorative lace-up hardware | 3 mm diameter black coated metal cord lacing | |
| Edge trim binding | 1 mm thick black faux leather piping | |
| Bottom foot pads | 5 mm thick non-slip silicone anti-scratch pads | |
| Stitching thread | High-tenacity polyester bonded thread | |
| Adhesive layer (wrap to core) | Low-VOC solvent-free contact adhesive | |
| Core moisture content | 10% | |
| Surface top coat | Anti-fouling matte PU protective coating | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm |
Adjustment / rotation / tilt / mobility / storage features
| Flexible arrangement | Two independent tables can be placed side-by-side or separated for use as coffee table + side table | |
|---|---|---|
| Surface object support | Flat level circular tops support drinks, reading materials, and decorative items at stable seating height | |
| Floor protection | Integrated anti-scratch foot pads prevent hard base contact with hard flooring surfaces | |
| Surface cleaning | Matte anti-fouling leather finish allows wiping clean with soft damp cloth without staining | |
| Decorative aesthetic function | Matching black lace-up stitch detail coordinates with matching storage furniture for cohesive interior design | |
| No integrated storage | Solid drum body has no internal drawers, lift-top compartments, or open shelves | |
| No moving mechanisms | Fixed rigid structure has no adjustable height, rotating, or wheeled mobility features | |
| Color modularity | Two-tone beige and orange finishes provide visual contrast for modern residential interiors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Modern living room center use | Suitable as primary coffee table set in front of 3-seat sofas in contemporary residences | |
|---|---|---|
| Designer show home / sample room use | Ideal for staged properties due to decorative two-tone finish and signature stitch detail | |
| Compact apartment lounge use | Flexible separated arrangement works for small footprint living spaces with limited open floor area | |
| Reception lounge / lounge area use | Suitable for low-traffic office reception areas or hotel lounge seating zones | |
| Recommended pairing | Matches with leather-wrapped storage cabinets with identical black lace-up stitch detailing for a coordinated look | |
| Surface use limitation | Do not place hot cookware or sharp objects directly on leather-wrapped tops to avoid permanent surface damage |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, applicable for structural performance | |
|---|---|---|
| EN 15372:2008 | Furniture – Requirements for surface durability of furniture, applicable for top surface finish | |
| EN 13722:2004 | Furniture – Upholstered furniture – Upholstery leather minimum requirements, applicable to wrap material |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal structural core | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances for interior decoration wooden furniture, applicable to core and adhesives | |
| GB/T 16799-2008 | Requirements for furniture upholstery leather, applicable to external wrap material |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal structural core; 2. GB 18584-2001: Limit of harmful substances for interior decoration wooden furniture, applicable to core and adhesives; 3. GB/T 16799-2008: Requirements for furniture upholstery leather, applicable to external wrap material; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
