| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Large table overall dimensions | 800 x 800 x 450 mm | |
|---|---|---|
| Small table overall dimensions | 600 x 600 x 450 mm | |
| Large tabletop thickness | 12 mm | |
| Small tabletop thickness | 12 mm | |
| Large pedestal base diameter (floor contact) | 550 mm | |
| Small pedestal base diameter (floor contact) | 450 mm | |
| Pedestal base diameter (tabletop connection) | 220 mm | |
| Nested combined footprint (minimal) | 820 x 820 x 450 mm | |
| Tabletop edge radius | 3 mm | |
| Floor clearance under large table edge | 438 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set weight | 45 kg | |
|---|---|---|
| Large table distributed static load capacity | 100 kg | |
| Surface scratch resistance (abrasion rating) | 6 Mohs | |
| Surface heat resistance | 180 °C | |
| Pedestal base static stability load | 150 kg | |
| Finish durability (paint coating) | Grade 1 | |
| Recommended maximum users for casual use | 4 persons | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large tabletop | 12mm matte white sintered stone, marble-effect veining, polished edge | |
|---|---|---|
| Small tabletop | 12mm matte grey sintered stone, fine linear stone texture | |
| Conical pedestal bases | 1.5mm thick carbon steel, matte black powder-coated finish | |
| Tabletop-to-base connector plates | 3mm thick galvanized steel, 4-point M8 bolt fixing | |
| Base bottom protective pads | 5mm thick non-slip EVA rubber, floor-scratch prevention | |
| Surface finish coating | Matte powder coat, 60μm thickness, anti-corrosion treatment | |
| Tabletop underside reinforcement | 10mm thick MDF backer board, bonded to sintered stone | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Nesting adjustment | Manual tuck of small table partially under large table, no tools required | |
|---|---|---|
| Surface functionality | Non-porous sintered stone top resists staining from spilled drinks and food | |
| Structural stability | Single center conical pedestal creates unobstructed legroom around full table perimeter | |
| Fixed height design | Non-adjustable fixed 450mm height aligned with standard sofa seat heights | |
| Assembly requirement | Simple 4-bolt attachment of base to each tabletop with included hex key | |
| Mobility | Fixed position design without casters, stable non-slip base contact with floor | |
| Dual-table flexible use | Small table can be pulled out for use as an independent side/end table next to seating | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary placement | Positioned directly in front of standard living room sofas | |
|---|---|---|
| Applicable space sizes | Small to medium apartments, open-plan living areas, lounge spaces | |
| Use case suitability | Holding beverage sets, decorative displays, snacks, reading materials | |
| Style matching | Modern minimalist, light luxury, Italian contemporary interior schemes | |
| Seating compatibility | Suitable for 4seat sectional or standard sofas, lounge seating groups | |
| Secondary use case | Small table used as standalone side table next to armchairs |
EU Market Access Requirements* EN Standards
| Household furniture safety general | EN 12521:2015 | |
|---|---|---|
| Furniture surface emission standard | EN 13722:2004 | |
| Furniture mechanical test for tables | EN 1730:2000 |
Standards applicable to China-market projects
| Table furniture safety standard | GB/T 3324 | |
|---|---|---|
| Furniture surface paint safety | GB 18584 | |
| Furniture mechanical stability | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Table furniture safety standard: GB/T 3324; 2. Furniture surface paint safety: GB 18584; 3. Furniture mechanical stability: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
