| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1260 x 700 x 500 mm | |
|---|---|---|
| Tabletop thickness | 18 mm | |
| Frame tube wall thickness | 2 mm | |
| Vertical support slat diameter | 12 mm | |
| Vertical slat spacing | 60 mm | |
| Lower frame rail height from floor | 60 mm | |
| Frame corner section size | 30 x 30 mm | |
| Under-table clearance height | 420 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 100 kg | |
|---|---|---|
| Product net weight | 23 kg | |
| Tabletop surface abrasion resistance | 2000 cycles | |
| Frame static load stability rating | 150 kg | |
| Recommended maximum place setting count | 4 | |
| Floor contact point count | 4 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | High-density fiberboard core with black veined stone-effect laminate | |
|---|---|---|
| Tabletop edge banding | Matching black PVC edge trim, 1mm thickness | |
| Frame material | Cold-rolled steel tubing with matte black powder-coated finish | |
| Vertical slat supports | Solid round steel bars, welded to upper and lower frame rails | |
| Frame connectors | Zinc-plated steel hex bolts and lock nuts, M6 size | |
| Foot pads | Non-marking black polyethylene glides, 5mm thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Structural design | Fixed welded knock-down frame with no moving parts, no folding or lifting mechanisms | |
|---|---|---|
| Assembly requirement | Flat-pack assembly required with included Allen key and hardware | |
| Floor leveling | Fixed non-adjustable polyethylene foot glides for even hard floor placement | |
| Storage configuration | Open under-table space with no enclosed shelves, drawers or doors | |
| Surface functionality | Stain-resistant, water-repellent wipe-clean tabletop surface | |
| Placement compatibility | Low-profile height designed for positioning directly in front of standard living room sofas | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room use | Positioned in front of sofas for holding beverages, reading materials and decor | |
|---|---|---|
| Small apartment open plan spaces | Compact footprint fits limited floor space without blocking walkways | |
| Office lounge and reception areas | Casual visitor seating areas for holding drinks and reading materials | |
| Contemporary and industrial interior schemes | Black metal and dark stone finish coordinates with neutral modern decor | |
| Hard floor and low-pile rug placement | Non-marking glides prevent scuffs on wood, tile and short-pile carpet surfaces |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables, applicable for performance verification | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface finishes, applicable to tabletop abrasion and stain resistance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to laminated tabletop assembly | |
|---|---|---|
| GB/T 24821-2009 | General technical requirements for metal furniture, applicable to steel frame construction | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to substrate and adhesives |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to laminated tabletop assembly; 2. GB/T 24821-2009: General technical requirements for metal furniture, applicable to steel frame construction; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to substrate and adhesives; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
