| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Large table overall dimensions | Φ800 x 470 mm | |
|---|---|---|
| Small side table overall dimensions | Φ600 x 410 mm | |
| Large table marble-effect glass top diameter | Φ650 mm | |
| Large table wood top rim width | 75 mm | |
| Large table tabletop thickness | 15 mm | |
| Large table metal leg diameter | 30 mm | |
| Large table lower storage compartment height | 280 mm | |
| Small table wood top thickness | 15 mm | |
| Small table pedestal column diameter | 180 mm | |
| Small table lower plinth diameter | Φ450 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Large table distributed static load capacity | 136 kg | |
|---|---|---|
| Large table enclosed storage volume | 85 L | |
| Set total net weight | 22 kg | |
| Top surface scratch resistance | 3000 abrasion cycles | |
| Metal frame rust resistance rating | 240 hours salt spray | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table inset top | 8mm tempered glass with black marble-vein print | |
|---|---|---|
| Large table rim and storage body | Natural oak veneer over MDF substrate | |
| Large table support legs | 1.2mm thick black powder-coated steel | |
| Large table storage compartment interiors | Matte melamine-lined MDF | |
| Small table top and base plinth | Natural oak veneer over MDF with matte polyurethane finish | |
| Small table central pedestal | 1.2mm thick black powder-coated steel | |
| Connector hardware | Zinc-plated steel bolts and dowels | |
| Surface finish coating thickness | 0.15mm polyurethane on wood surfaces | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting design | Small table slides partially under large table to reduce footprint | |
|---|---|---|
| Large table lower storage | Enclosed curved cabinet for storing living room accessories | |
| Tabletop surface use | Smooth non-porous glass top supports drinkware, decor and table accessories | |
| Floor protection | Hidden felt pads on all leg and plinth bases prevent floor scratching | |
| Assembly configuration | Knock-down assembly with included hex key and hardware | |
| Surface stability | Pedestal base on small table eliminates leg obstructions for seating placement | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary use space | Residential living rooms placed in front of sofas for drink and decor placement | |
|---|---|---|
| Secondary use case | Small apartment seating areas where space-saving nesting design reduces unused footprint | |
| Recommended complementary seating | 3-seater sofas, loveseats or modular sectionals 2400 mm wide | |
| Surface care guidance | Wipe glass and wood tops with soft damp cloth, avoid abrasive cleaners | |
| Style alignment | Modern minimalist, mid-century modern and Japani interior design schemes |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables | |
|---|---|---|
| EN 14749:2016 | Safety requirements for domestic storage units, applicable for lower cabinet |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for wood component quality | |
|---|---|---|
| GB/T 4893.8-2013 | Surface wear resistance test method for furniture coatings, applicable for top finish |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for wood component quality; 2. GB/T 4893.8-2013: Surface wear resistance test method for furniture coatings, applicable for top finish; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
