| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 800 x 800 x 420 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Vertical leg cross-section | 50 x 50 mm | |
| Frame metal wall thickness | 1.2 mm | |
| Lower horizontal frame bar height | 60 mm | |
| Undertable floor clearance | 30 mm | |
| Corner leg outer radius | 5 mm | |
| Tabletop overhang past frame | 10 mm | |
| Inner open frame cavity width | 700 mm | |
| Support foot pad diameter | 20 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net product weight | 28 kg | |
|---|---|---|
| Distributed tabletop static load capacity | 100 kg | |
| Surface abrasion resistance (glass) | 10000 cycles | |
| Surface abrasion resistance (metal) | 5000 cycles | |
| Recommended maximum number of users | 4 | |
| Product warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | 12mm black tempered safety glass with polished eased edges | |
|---|---|---|
| Vertical frame legs | 1.2mm thick polished 304 stainless steel square tubing | |
| Lower horizontal frame bars | 1.2mm thick polished stainless steel rectangular tubing | |
| Frame connection hardware | Zinc-plated steel M6 hex bolts with lock washers | |
| Floor protection pads | Non-marking TPE rubber adhesive pads at each leg base | |
| Frame surface finish | Mirror polished electroplated finish with 0.1mm plating thickness | |
| Glass underside protective strip | EVA foam gasket between glass and metal frame | |
| Frame weld points | TIG welded joints ground and polished to match frame finish | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Assembly structure | Knock-down construction with 8 bolt connections for flat packing | |
|---|---|---|
| Floor leveling adjustment | Fixed non-adjustable rubber feet for stable placement on hard floors | |
| Surface function | Smooth non-porous glass surface for wipe-clean daily use | |
| Load distribution | Open frame structure distributes weight evenly across four corner supports | |
| Edge safety | Eased polished glass edges eliminate sharp contact points | |
| Placement versatility | Freestanding design suitable for centered or wall-adjacent placement | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary residential use | Living room placement in front of sofas for beverages, decor and reading materials | |
|---|---|---|
| Small space suitability | Studio apartment and compact living area layouts due to 800mm square footprint | |
| Commercial lounge use | Office reception areas, hotel lobbies and modern waiting spaces | |
| Recommended surface use | Placement on hard tile, wood or low-pile carpet flooring | |
| Style matching | Compatible with modern, minimalist, contemporary and urban industrial interior schemes | |
| Recommended complementary items | Pair with upholstered sofas, chrome accent chairs and minimalist area rugs |
EU Market Access Requirements* EN Standards
| Domestic furniture safety standard | EN 12521:2015 | |
|---|---|---|
| Tempered glass safety standard | EN 12150:2015 |
Standards applicable to China-market projects
| Glass safety standard | GB 15763.2 | |
|---|---|---|
| Metal furniture dimensional tolerance | GB/T 3324 |
This product must meet the following technical requirements: 1. Glass safety standard: GB 15763.2; 2. Metal furniture dimensional tolerance: GB/T 3324; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
