| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (nested) | 880 x 880 x 550 mm | |
|---|---|---|
| Large lower table diameter | 880 mm | |
| Large lower table total height | 450 mm | |
| Small taller table diameter | 600 mm | |
| Small taller table total height | 550 mm | |
| Table top thickness | 12 mm | |
| Large pedestal base diameter | 500 mm | |
| Small pedestal base diameter | 350 mm | |
| Brass base trim width | 15 mm | |
| Carry handle ring outer diameter | 80 mm | |
| Floor clearance under large table edge | 10 mm | |
| Nesting overlap clearance | 100 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set gross weight | 45 kg | |
|---|---|---|
| Large table distributed static load capacity | 50 kg | |
| Surface scratch resistance | 3000 abrasion cycles | |
| Recommended maximum user weight for edge seating | 100 kg | |
| Surface water and stain resistance | Grade 5 | |
| Pedestal base static stability tilt angle | 15 degrees | |
| Standard product warranty | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table top | 12mm white veined sintered stone, polished finish, brass edge trim | |
|---|---|---|
| Small table top | 12mm white veined sintered stone, polished finish, central brass carry handle | |
| Large table pedestal | 1.2mm thick cold-rolled steel, vertical fluted texture, off-white matte paint | |
| Small table pedestal | 1.2mm thick cold-rolled steel, vertical fluted texture, orange matte paint | |
| Pedestal base trim | 0.8mm thick brass-finish stainless steel, polished mirror finish, floor protective felt pad | |
| Carry handle assembly | Solid brass-plated steel ring and mounting plate, secured with 4 steel screws | |
| Internal connection hardware | M8 carbon steel hex bolts, anti-loosening washers, 1.5mm steel mounting plate | |
| Floor contact pads | 5mm thick non-slip wool felt, glued to base trim to prevent floor scratches | |
| Paint finish on pedestals | Epoxy polyester powder coat, 60um film thickness, scratch and chip resistant | |
| Edge trim adhesive | High-strength structural polyurethane adhesive, waterproof bond between trim and stone | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm |
Adjustment / rotation / tilt / mobility / storage features
| Nesting space-saving function | Small taller table slides partially under large lower table, reducing set footprint to 0.77 sqm | |
|---|---|---|
| Portable small table transport | Central brass ring handle allows single-handed lifting and repositioning of small table | |
| Surface use functionality | Smooth non-porous tops support placement of drinks, reading materials, decor and light serving trays | |
| Leveling adjustment | Hidden adjustable feet under base trim allow 5mm height adjustment for uneven floors | |
| Assembly requirement | Pedestal attaches to table top with 4 bolts, no special tools required for home assembly | |
| Surface cleaning | Polished stone top wipes clean with damp cloth, no special sealant or maintenance required | |
| Dual height serving function | Two surface heights accommodate both low coffee table use and elevated side table serving next to seating | |
| Anti-tip design | Weighted steel pedestal base lowers center of gravity to prevent tipping when items are placed on table edges | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room placement | Position in front of sofas and sectionals for holding drinks, reading materials and decorative items | |
|---|---|---|
| Small apartment space optimization | Nesting design reduces footprint when not in use, suitable for compact urban living spaces | |
| Model home and showroom display | Two-tone orange and cream design with brass accents fits contemporary light luxury interior styling | |
| Lounge and waiting area use | Place in office reception areas or boutique lounges for guest refreshment placement | |
| Flexible side table use | Reposition taller small table next to armchairs or sofas as an accent side table when needed | |
| Complementary pairing | Coordinate with curved velvet sofas, neutral area rugs and minimalist decor for a cohesive modern aesthetic |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, applicable to living room coffee tables | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for surface resistance to cold liquids, applicable to sintered stone tops | |
| EN 1022:2018 | Furniture – Seating – Determination of stability, referenced for pedestal table stability testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to stone-top metal-base tables | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in interior decoration materials, applicable to paint and adhesive finishes | |
| GB/T 4893.4-2013 | Surface abrasion resistance test method for furniture surfaces, applicable to table top finish |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to stone-top metal-base tables; 2. GB 18584-2001: Limit of harmful substances in interior decoration materials, applicable to paint and adhesive finishes; 3. GB/T 4893.4-2013: Surface abrasion resistance test method for furniture surfaces, applicable to table top finish; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
