| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (side-by-side placement) | 1200 x 800 x 460 mm | |
|---|---|---|
| Large table (white half-bowl base) top diameter | 800 mm | |
| Large table total height | 457 mm | |
| Large table top thickness | 25 mm | |
| Large table base wall thickness | 18 mm | |
| Small table (black full-sphere base) top diameter | 650 mm | |
| Small table total height | 457 mm | |
| Small table top thickness | 20 mm | |
| Small table base wall thickness | 15 mm | |
| Nesting clearance under large table | 410 mm | |
| Base floor contact diameter (large table) | 720 mm | |
| Base floor contact diameter (small table) | 580 mm | |
| Edge radius of tabletops | 5 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall |
Net weight / load capacity / users / durability
| Total set net weight | 35 kg | |
|---|---|---|
| Large table distributed static load capacity | 50 kg | |
| Surface abrasion resistance | 2000 cycles | |
| Surface stain resistance level | Grade 4 | |
| Base stability tilt threshold | 15 degrees | |
| Recommended maximum number of users served | 4 | |
| Structural service life (residential use) | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table pedestal base | Fiberglass-reinforced composite with matte white lacquer finish | |
|---|---|---|
| Small table pedestal base | Fiberglass-reinforced composite with matte black lacquer finish | |
| Tabletop substrate (both units) | High-density MDF core with sealed edges | |
| Tabletop surface finish | Brass-toned metallic powder coating / electroplated finish | |
| Bottom floor protectors | 3mm thick non-slip EVA felt pads per base | |
| Assembly connection hardware | Zinc-plated steel M8 connector bolts with pre-installed threaded inserts | |
| Finish coat thickness | 0.15 mm polyurethane clear top coat | |
| Base material moisture content | 8% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nested space-saving storage | Small table tucks fully under large table to reduce footprint when not in use | |
|---|---|---|
| Dual-surface flexible use | Both tables provide independent flat surfaces for decor, beverages, or serving | |
| Fixed static pedestal structure | No moving parts, lift mechanisms, casters or storage compartments | |
| Floor protection function | Felt base pads prevent scuffing and scratching on hardwood, tile, or laminate flooring | |
| Knock-down assembly design | Tabletops attach to bases with included hardware for flat-pack shipping | |
| Multi-configuration placement | Units can be arranged side-by-side, offset, separated as side tables, or nested | |
| Easy-clean surface | Smooth non-porous metallic top wipes clean with a soft damp cloth | |
| Anti-tip rounded form | Curved spherical base has no sharp corners or edges for child-safe household use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room placement | Position in front of 3seat sofas for coffee service, book and decorative display | |
|---|---|---|
| Small apartment / studio use | Nested design saves floor space when additional surface area is not required | |
| Lounge and reception waiting areas | Use in boutique office waiting rooms, hotel lobbies, or lounge zones for modern aesthetic | |
| Flexible side table use | Separate smaller table for use as an end table beside armchairs or sofas as needed | |
| Modern minimalist / contemporary interiors | Matches monochrome black/white and metallic brass accent design palettes | |
| Low-traffic indoor use only | Designed for dry indoor environments, not suitable for outdoor or high-moisture areas |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, applicable to residential coffee table use | |
|---|---|---|
| EN 71-3:2019+A1:2021 | Safety of toys – Migration of certain elements, applicable to child-safe household furniture finishes | |
| EN 13722:2004 | Furniture – Test methods for surface resistance to cold liquids, applicable to tabletop spill resistance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to composite base/substrate construction | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, required for formaldehyde/VOC emission control | |
| GB/T 4893.4-1985 | Surface wear resistance test for furniture finishes, applicable to metallic lacquered tops |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to composite base/substrate construction; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, required for formaldehyde/VOC emission control; 3. GB/T 4893.4-1985: Surface wear resistance test for furniture finishes, applicable to metallic lacquered tops; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
