| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Set overall footprint (nested configuration) | 1300 x 710 x 450 mm | |
|---|---|---|
| Large (white-top) table dimensions | 1300 x 710 x 410 mm | |
| Small (black-top) table dimensions | 900 x 480 x 450 mm | |
| Tabletop thickness (both tables) | 12 mm | |
| U-base leg section width | 60 mm | |
| U-base leg material wall thickness | 2 mm | |
| Floor clearance under tabletops | 120 mm | |
| Tabletop edge radius (all corners) | 150 mm | |
| Offset nesting overlap length | 400 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 45 kg | |
|---|---|---|
| Distributed static load per tabletop | 100 kg | |
| Tabletop surface abrasion resistance | ≥4000 cycles | |
| Surface water absorption rate | ≤0.05% | |
| Frame static load rating (per table) | 150 kg | |
| Recommended maximum seating group size | 4 seats | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| White tabletop | Matte white marble-look sintered stone, 12mm thickness, sealed surface | |
|---|---|---|
| Black tabletop | Matte black veined sintered stone, 12mm thickness, sealed surface | |
| Support frames (both tables) | Black powder-coated carbon steel U-shaped cantilever legs | |
| Floor contact pads | Non-slip rubber pads at base feet | |
| Tabletop edge finish | Hand-polished rounded smooth edge, no sharp corners | |
| Frame joinery | M8 bolted metal bracket connections between top and base | |
| Frame coating thickness | 60 micron powder coat, anti-rust pretreatment | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Nested flexible arrangement | Small table slides fully or partially under large table for space-saving storage | |
|---|---|---|
| Surface use cases | Smooth non-porous tops support drinks, decor, laptops, and light dining use | |
| Fixed height design | No height adjustment, fixed working height optimized for sofa seating use | |
| Mobility design | No casters included, stable fixed placement on flat floors | |
| Storage provision | No integrated drawers, shelves, or hidden storage compartments | |
| Edge safety feature | Fully rounded perimeter edges eliminate sharp corner collision hazards | |
| Cleaning compatibility | Non-porous sealed surface supports wet wiping and stain removal without sealing reapplication | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary residential space | Living rooms positioned in front of 3.5 m long sofas, optimized for compact small-to-medium units | |
|---|---|---|
| Secondary use space | Open-plan lounge areas, apartment reception nooks, and home office casual seating zones | |
| Target user group | Residential homeowners, rental property operators, and small office lounge fit-outs seeking flexible space-saving furniture | |
| Recommended surface use | Holding beverages, table lamps, decorative objects, laptops, and snack trays during casual seating | |
| Styling compatibility | Pairs with upholstered sofas in neutral tones, modern minimalist, light luxury, and Nordic interior design schemes | |
| Space saving benefit | Suitable for small apartments requiring flexible surface area that can be condensed when not in use |
EU Market Access Requirements* EN Standards
| Residential furniture mechanical safety | EN 12521:2015 | |
|---|---|---|
| Surface resistance to cold liquids | EN 12720:2013 |
Standards applicable to China-market projects
| Tabletop mechanical performance | GB/T 30105 | |
|---|---|---|
| Metal frame coating performance | GB/T 19285 | |
| Furniture safety edge requirements | GB 28007 | |
| Formaldehyde emission limits | GB 18584 |
This product must meet the following technical requirements: 1. Tabletop mechanical performance: GB/T 30105; 2. Metal frame coating performance: GB/T 19285; 3. Furniture safety edge requirements: GB 28007; 4. Formaldehyde emission limits: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
