| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (nested configuration) | 813 x 813 x 457 mm | |
|---|---|---|
| Large table top diameter | 813 mm | |
| Large table top thickness | 18 mm | |
| Large table base outer diameter | 787 mm | |
| Small table top diameter | 610 mm | |
| Small table total height | 457 mm | |
| Nesting clearance between tables | 76 mm | |
| Side decorative stitch panel height | 330 mm | |
| Bottom anti-scratch pad thickness | 5 mm | |
| Wood edge trim width | 13 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 29 kg | |
|---|---|---|
| Large table static distributed load capacity | 100 kg | |
| Table top surface scratch resistance | 2000 abrasion cycles | |
| Base floor protection load per pad | 15 kg | |
| Recommended maximum decor weight per table | 30 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table tabletop core | 18 mm thick E1 grade engineered wood board | |
|---|---|---|
| Small table tabletop core | 18 mm thick E1 grade engineered wood board | |
| Table top edge trim | Solid pine wood with matte walnut finish | |
| Large table base upholstery | Matte off-white polyurethane faux leather, 0.8 mm thick | |
| Small table base upholstery | Terracotta orange polyurethane faux leather, 0.8 mm thick | |
| Drum base internal frame | 15 mm thick particleboard structural frame | |
| Decorative side accent | Black waxed faux leather lace-up stitch detail | |
| Bottom floor protectors | 30 mm diameter non-slip polyethylene felt pads | |
| Upholstery adhesive | Low-VOC water-based contact cement | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Small table slides fully under large table to reduce footprint by 40% | |
|---|---|---|
| Dual surface use | Both tables support independent use as side or accent tables | |
| Surface protection | Sealed top coating resists water rings from cold drink containers | |
| Floor protection | Felt base pads prevent scuffing on hard flooring and low-pile rugs | |
| Decorative side detail | Fixed lace-up stitch accent provides modern visual contrast | |
| Leveling stability | Fixed cylindrical base provides wobble-free placement on flat floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Small apartment lounge use | Nesting function saves floor space in compact urban living areas | |
|---|---|---|
| Modern contemporary interiors | Matches tufted boucle and leather sofas in neutral or warm color palettes | |
| Casual entertaining use | Separate tables provide extra surface for drinks, snacks and decor | |
| Low-traffic lounge areas | Suitable for residential use, not rated for high-traffic commercial spaces |
EU Market Access Requirements* EN Standards
| Residential furniture safety requirement | EN 12521:2015 |
|---|
Standards applicable to China-market projects
| Table top formaldehyde emission limit | GB/T 18580E1 grade | |
|---|---|---|
| Upholstery fabric color fastness to rubbing | GB/T 3920Grade 4 | |
| Furniture mechanical stability requirement | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Table top formaldehyde emission limit: GB/T 18580E1 grade; 2. Upholstery fabric color fastness to rubbing: GB/T 3920Grade 4; 3. Furniture mechanical stability requirement: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
