| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 700 x 450 mm | |
|---|---|---|
| Tabletop overhang past support frame | 80 mm | |
| Tabletop edge thickness | 50 mm | |
| Lower storage shelf dimensions | 1000 x 600 mm | |
| Lower shelf usable surface height from floor | 80 mm | |
| Central vertical support beam width | 120 mm | |
| Side support rod diameter | 12 mm | |
| Tabletop thickness (glass panel) | 12 mm | |
| Lower shelf panel thickness | 10 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 50 kg | |
|---|---|---|
| Product net weight | 38 kg | |
| Recommended number of users | 4 | |
| Glass surface impact resistance | 200 mm drop ball test | |
| Warranty period for structural frame | 3 years | |
| Recommended simultaneous user capacity | 4 | |
| Tempered glass impact resistance | 227g steel ball 200 mm drop pass | |
| Metal powder coating abrasion resistance | 1000 rub cycles without substrate exposure | |
| Structural frame warranty period | 3 years | |
| Shelf Distributed Load | 30 kg/shelf |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | 12mm clear tempered glass with black high-gloss back-painted finish | |
|---|---|---|
| Lower storage shelf panel | 10mm clear tempered glass with matching black high-gloss back-painted finish | |
| Central support structure | 1.5mm thick cold-rolled steel with matte black powder-coated finish | |
| Perimeter support rods | 12mm diameter solid steel rods with matte black powder-coated finish | |
| Tabletop edge frame | Powder-coated steel frame bonded to glass perimeter | |
| Base foot pads | 4 units of adjustable non-slip plastic foot pads | |
| Surface finish coating | Scratch-resistant high-gloss baked paint on metal components | |
| Central Z-shaped support brace | 1.5mm thick cold-rolled steel with matte black powder-coated finish, fully welded connection joints | |
| Vertical corner support rods | 12mm diameter solid cold-rolled steel rods with matte black powder-coated finish | |
| Tabletop perimeter edge frame | 1.5mm thick powder-coated cold-rolled steel frame bonded to glass panel perimeter | |
| Lower shelf perimeter frame | 1.5mm thick powder-coated cold-rolled steel frame bonded to lower glass panel perimeter | |
| Base leveling foot pads | 4 units of 30mm diameter adjustable non-slip polypropylene foot pads |
Adjustment / rotation / tilt / mobility / storage features
| Open lower storage shelf | Flat enclosed-edge shelf holds books, remote controls and decorative items with 280mm vertical clearance between shelf and tabletop | |
|---|---|---|
| Leveling adjustment | Adjustable foot pads rotate up to 10mm to compensate for uneven floor surfaces | |
| Surface stain resistance | Non-porous high-glass glass surface wipes clean with dry or damp cloth, resists common household beverage spills | |
| Stable structural support | Z-shaped central beam plus 4 corner vertical rods distribute top load evenly across lower base frame | |
| Edge safety | Polished rounded glass edges and covered metal frame edges prevent sharp contact injury | |
| Floor protection | Soft plastic foot pads prevent scratching on hardwood, tile and laminate flooring | |
| Fixed lower open storage shelf | Raised-lip fixed shelf integrated into the support frame holds books, remote controls and decorative items with 280mm vertical clearance, no moving parts | |
| Per-corner leveling adjustment | Threaded foot pads rotate to provide 10mm of vertical height adjustment per corner to compensate for uneven hard floor surfaces | |
| Stain-resistant work surface | Non-porous high-gloss back-painted glass surface resists common household beverage spills, wipes clean with a dry or damp microfiber cloth with no residual staining | |
| Even load distribution | Central Z-shaped brace plus four corner vertical rods transfer top loads evenly across the entire lower base frame, eliminating frame flex under rated static load | |
| Contact edge safety | Polished rounded glass edges and fully enclosed steel frame edges eliminate all sharp exposed contact points to prevent cut injury during use | |
| Hard floor protection | Soft polypropylene foot pads create a non-abrasive buffer between the steel base and hardwood, tile, or laminate flooring to prevent scratch damage |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 1 | |
|---|---|---|
| Shipping carton dimensions | 1270 x 770 x 150 mm | |
| Gross shipping weight | 44 kg | |
| Shipping volume per unit | 0.147 CBM | |
| Assembly time | 30 minutes | |
| 20ft GP container loading quantity | 180 units | |
| Packaging protection | 50mm thick EPS foam corner protectors plus 5-layer corrugated outer carton | |
| Included assembly hardware | Allen key, M6 mounting bolts, and installation instruction sheet | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Modern minimalist interiors | Matches contemporary, urban and minimalist decor schemes with monochrome black high-gloss finish | |
|---|---|---|
| Small to medium apartment layouts | 1200mm length is proportional to compact living areas without occupying excessive floor space | |
| Show home and model unit staging | High-gloss reflective surface creates a polished, upscale appearance for real estate staging projects | |
| Office reception lounge use | Suitable for corporate waiting areas and breakout spaces to hold reading materials and refreshments | |
| Small to medium compact apartment layouts | 1200mm length provides sufficient surface area for beverage service without occupying excessive open floor space, with open lower shelf adding storage without visual bulk | |
| Residential rental property furnishing | Durable scratch-resistant glass and powder-coated steel construction withstands frequent tenant turnover, with simple wipe-clean maintenance for property managers | |
| Show home and real estate model unit staging | High-gloss reflective surface creates a polished upscale appearance for staged properties, with clean geometric lines appealing to broad buyer demographics | |
| Office reception and breakout lounge areas | Suitable for corporate waiting areas and informal breakout spaces to hold reading materials, refreshments and small decorative items |
EU Market Access Requirements* EN Standards
| Domestic furniture safety | EN 12521:2015 | |
|---|---|---|
| Glass in furniture safety | EN 12150:2015 | |
| Surface scratch resistance | EN 15186:2012 | |
| Residential table safety and durability | EN 12521:2015 | |
| Toughened glass for furniture use | EN 12150:2015 | |
| Furniture surface scratch resistance | EN 15186:2012 |
Standards applicable to China-market projects
| Tempered glass safety | Recommended references: GB 15763.2 | |
|---|---|---|
| Furniture structural safety | GB/T 3324 | |
| Formaldehyde emission | GB 18584 | |
| Coating heavy metal limit | GB/T 23994 | |
| Tempered glass safety for furniture | GB 15763.2 | |
| General household furniture technical requirements | GB/T 3324 |
This product must meet the following technical requirements: 1. Tempered glass safety: Recommended references: GB 15763.2; 2. Furniture structural safety: GB/T 3324; 3. Formaldehyde emission: GB 18584; 4. Coating heavy metal limit: GB/T 23994; 5. Tempered glass safety for furniture: GB 15763.2; 6. General household furniture technical requirements: GB/T 3324; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
