| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1220 x 700 x 400 mm | |
|---|---|---|
| Table top thickness | 40 mm | |
| Marble insert dimensions | 600 x 700 mm | |
| Matte black top section dimensions | 620 x 700 mm | |
| Plinth base elevation above floor | 10 mm | |
| Underside floor clearance | 10 mm | |
| Top edge profile | 0 mm radius flat polished edge | |
| Marble section thickness match | 40 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total product weight | 68 kg | |
|---|---|---|
| Distributed top static load capacity | 100 kg | |
| Marble surface impact resistance | Grade 2 | |
| Marble surface stain resistance | Penetrating sealant treated | |
| Base static stability load | 150 kg | |
| Surface abrasion resistance | 4000 cycles | |
| Recommended warranty period | 12 months | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Matte black top and plinth body | 18mm thick MDF core with matte black textured laminate finish | |
|---|---|---|
| Offset top insert | 20mm thick polished black Marquina marble with white veining | |
| Marble backing layer | Fiberglass anti-crack mesh reinforcement | |
| Internal plinth frame | 20x40mm square steel tube welded support frame | |
| Base bottom glides | 5mm thick non-slip rubber pads | |
| Joint between top sections | Structural epoxy adhesive with concealed metal dowels | |
| Matte surface finish | Scratch-resistant PU matte coating with 0.2mm finish thickness | |
| Available finish variants | Matte black, polished black marble, white marble insert | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Table structure | Fixed solid plinth block design with no moving parts | |
|---|---|---|
| Floor protection | Concealed rubber glides under base prevent hard floor scratching | |
| Surface functionality | Split design provides separate display and beverage placement zones | |
| Vacuum compatibility | 10mm floor clearance allows entry of low-profile robot vacuums | |
| Assembly requirement | Fully assembled delivery, no on-site hardware installation needed | |
| Floor placement | Free-standing fixed placement with no wall anchoring required | |
| Cable management | No integrated power or cable routing features | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room placement | Positioned in front of 3-seater or L-shaped sofas for beverage and decor display | |
|---|---|---|
| Modern minimalist interior schemes | Complements monochrome, wabi-sabi, and Italian minimalist design palettes | |
| Low-pile rug installation | Sits stably on flat area rugs or hard wood/tile floors | |
| Showroom display use | Suitable for furniture showroom living room set vignettes | |
| Daily residential use | Supports placement of books, vases, glassware and decorative accessories | |
| Small apartment living spaces | Low-profile block design does not block sightlines in compact open-plan areas |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for surface resistance to cold liquids | |
| EN 717-1:2004 | Formaldehyde emission from wood-based panels |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture | |
|---|---|---|
| GB 6566-2010 | Limit of radionuclides in building materials | |
| GB/T 1931-2009 | Moisture content determination for wood-based panels |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture; 2. GB 6566-2010: Limit of radionuclides in building materials; 3. GB/T 1931-2009: Moisture content determination for wood-based panels; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
