| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 800 x 800 x 760 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Leg cross-section | 30 x 30 mm | |
| Leg wall thickness | 1.5 mm | |
| Apron height | 60 mm | |
| Under-table knee clearance height | 688 mm | |
| Floor clearance from apron bottom | 688 mm | |
| Leg corner inset from table edge | 20 mm | |
| Anti-slip foot pad diameter | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 200 kg | |
|---|---|---|
| Tabletop surface hardness | 7.5 Mohs | |
| Maximum heat resistance of tabletop | 1200 °C | |
| Recommended seating capacity | 4 persons | |
| Net product weight | 45 kg | |
| Leg finish durability (appearance life) | 15 years | |
| Product warranty period | 2 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Matte black sintered stone with light linear veining, non-porous surface | |
|---|---|---|
| Perimeter apron frame | Matte black powder-coated carbon steel, welded corner construction | |
| Legs | Square-section matte black powder-coated carbon steel, welded to apron frame | |
| Foot pads | Non-slip TPE rubber, floor-protecting non-marking design | |
| Tabletop edge finish | Precision straight cut, slightly eased edge to prevent chipping | |
| Frame coating | Electrostatic powder coat, corrosion-resistant finish | |
| Tabletop-core substrate | High-density aluminum honeycomb backing for stone reinforcement | |
| Fasteners | Zinc-plated steel bolts and threaded inserts for leg attachment | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Knock-down leg attachment to pre-assembled apron frame, hardware included | |
|---|---|---|
| Floor protection | TPE foot pads prevent floor scratches and reduce movement noise | |
| Surface maintenance | Non-porous sintered stone surface resists stains, requires no sealing | |
| Under-table accessibility | Open four-sided clearance allows unobstructed leg movement for diners | |
| Heat resistance function | Tabletop withstands hot cookware placement without surface damage | |
| Leveling adjustment | Minor height adjustment via foot pad rotation for uneven floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Small apartment dining areas | Fits 4diners in compact kitchen or dining nook spaces | |
|---|---|---|
| Studio or open-plan living spaces | Minimalist silhouette blends with modern and contemporary interior decor | |
| Breakfast nook use | Compact footprint suits 2-person casual dining in residential kitchens | |
| Small office break rooms | Durable easy-clean surface supports daily staff meal and break use | |
| Balcony casual dining | Weather-resistant metal frame and non-porous top suit semi-outdoor covered spaces |
EU Market Access Requirements* EN Standards
| Furniture surface resistance | EN 12720:2009+A1:2013 | |
|---|---|---|
| Table structural stability | EN 1730:2012 | |
| Scratch resistance | EN 15186:2011 | |
| Surface scratch resistance rating | Level 4 (EN 438) |
Standards applicable to China-market projects
| Tabletop material safety | GB 6566 | |
|---|---|---|
| Furniture structural safety | GB/T 3324 | |
| Surface coating safety | GB 18584 | |
| Metal furniture durability | GB/T 24821 |
This product must meet the following technical requirements: 1. Tabletop material safety: GB 6566; 2. Furniture structural safety: GB/T 3324; 3. Surface coating safety: GB 18584; 4. Metal furniture durability: GB/T 24821; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
