| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 600 x 450 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop uniform static load capacity | 75 kg | |
|---|---|---|
| Net product weight | 28 kg | |
| Vertical slat lateral load resistance | 15 kg per slat | |
| Surface scratch resistance rating | 6 Mohs | |
| Recommended number of users | 4 | |
| Frame anti-rust service life | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | Polished sintered stone | |
|---|---|---|
| Frame material | Cold-rolled steel | |
| Vertical support slats | Solid steel square bars | |
| Frame weld points | Ground and powder-coated | |
| Tabletop underside backing | Fiber-reinforced cement board | |
| Frame foot pads | Non-slip polyethylene pads | |
| Surface finish on metal | Textured matte black powder coat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Open base design | No lower storage shelf, provides unobstructed leg room for seating around the table | |
|---|---|---|
| Water-resistant tabletop | Non-porous sintered stone allows wipe-clean of spills without staining | |
| Floor protection | Recessed foot pads eliminate hard metal contact with hard flooring surfaces | |
| Stable load distribution | Perimeter box frame distributes tabletop weight evenly to prevent wobble | |
| Heat-resistant surface | Sintered stone top supports placement of hot mugs up to 180°C without damage | |
| Leveling adjustment | Fixed pads provide stable placement on low-pile carpet and hard flat floors | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living rooms | Positioned in front of sofas for beverage, reading material and decor placement | |
|---|---|---|
| Apartment lounge areas | Compact rectangular footprint fits small to medium open-plan living spaces | |
| Modern office reception areas | Clean minimalist design suits contemporary office waiting room settings | |
| Low-height display use | Flat polished top works for decorative displays in residential entry foyers | |
| Hard surface flooring settings | Soft foot pads prevent scratches on tile, hardwood and polished concrete floors |
EU Market Access Requirements* EN Standards
| Furniture surface durability | EN 15185:2011 | |
|---|---|---|
| Metal furniture structural stability | EN 1730:2012 | |
| Furniture mechanical safety | EN 12521:2015 |
Standards applicable to China-market projects
| Table dimensional tolerance | GB/T 3324 | |
|---|---|---|
| Metal furniture coating adhesion | GB/T 1993 | |
| Formaldehyde emission | GB 18584 |
This product must meet the following technical requirements: 1. Table dimensional tolerance: GB/T 3324; 2. Metal furniture coating adhesion: GB/T 1993; 3. Formaldehyde emission: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
