| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (offset arrangement) | 910 x 910 x 460 mm | |
|---|---|---|
| Large table round top diameter | 910 mm | |
| Large table total height | 460 mm | |
| Large table top thickness | 38 mm | |
| Large table base plinth diameter | 550 mm | |
| Small table oval top dimensions | 600 x 400 mm | |
| Small table total height | 400 mm | |
| Small table glass top thickness | 10 mm | |
| Small table base plinth diameter | 380 mm | |
| Clear nesting under-table clearance (large table) | 370 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Set total net weight | 21.5 kg | |
|---|---|---|
| Large table static distributed load capacity | 120 kg | |
| Top surface scratch resistance | 2000 cycles | |
| Anti-tipping stability rating | Pass 10-degree tilt test | |
| Design service life | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table top | Walnut wood veneer over MDF core, matte scratch-resistant finish | |
|---|---|---|
| Large table central support sphere | Powder-coated dark carbon steel, welded joint to base plinth | |
| Large table base plinth | Matte black powder-coated carbon steel, 3mm wall thickness, floor protection pads | |
| Small table top | Clear tempered safety glass, polished edge, light walnut wood accent trim | |
| Small table central pedestal | Brushed dark gunmetal carbon steel cylinder, 2mm wall thickness | |
| Small table base plinth | Walnut-veneer MDF top layer with black metal bottom plate, felt floor glides | |
| Hardware and connectors | Zinc-plated steel assembly bolts, hex key included for assembly | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Nesting configuration | Small table slides fully under the large table to reduce footprint by 40% when not in use | |
|---|---|---|
| Offset arrangement | Tables can be positioned at 180degree offsets to create multi-level display surfaces | |
| Surface use | Flat tops support drinks, books, decorative objects and light display items without raised edges | |
| Floor protection | Non-marking felt glides on all base plinths prevent scratching hard flooring and rugs | |
| Assembly requirement | Tool-included assembly attaches top sections to pedestal bases with 8 connection points | |
| Cleaning compatibility | Smooth sealed surfaces support wiping with dry or damp cloth without special cleaning products | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Placed in front of sofas or sectionals as central lounge surface for drinks and decor | |
|---|---|---|
| Apartment open-plan spaces | Space-saving nesting design suits small footprint urban living areas | |
| Lounge waiting areas | Suitable for light-use office or hospitality lounge seating zones | |
| Complementary furniture pairing | Pairs with curved upholstered sofas, boucle seating, and neutral modern decor schemes | |
| Multi-surface display | Offset arrangement creates tiered surfaces for displaying plants, books, and decorative objects |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic seating area tables | |
|---|---|---|
| EN 14073-2:2004 | Office and domestic storage/table furniture safety requirements | |
| EN 12150-1:2015 | Thermally toughened soda lime silicate safety glass for furniture use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to veneer table top components | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable to steel pedestal base components | |
| GB 15763.2-2005 | Safety standards for tempered glass, applicable to small table glass top | |
| GB/T 4893.8-2013 | Surface wear resistance test method for furniture finishes |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to veneer table top components; 2. GB/T 3325-2017: Metal furniture general technical requirements, applicable to steel pedestal base components; 3. GB 15763.2-2005: Safety standards for tempered glass, applicable to small table glass top; 4. GB/T 4893.8-2013: Surface wear resistance test method for furniture finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
