Product supplierModern Round Smoked Glass Coffee Table with Central Cutout and Dual-Tone Curved Metal Base, 12 mm tempered smoked grey glass with polished edge
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 900 × 900 × 450 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Central open cutout diameter | 400 mm | |
| Base outer arc width | 600 mm | |
| Base wall thickness | 2 mm | |
| Floor clearance under base | 120 mm | |
| Exterior black support height | 430 mm | |
| Interior brass liner height | 120 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 50 kg | |
|---|---|---|
| Distributed tabletop static load | 30 kg | |
| Vertical static load per base leg | 15 kg | |
| Recommended maximum placement items | 8 | |
| Surface finish abrasion resistance | 2000 cycles | |
| Tempered glass impact resistance | 1 kg drop from 1 m | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop | 12 mm tempered smoked grey glass with polished edge | |
|---|---|---|
| Exterior base supports | Powder-coated matte black cold-rolled steel | |
| Interior cutout surround | Brushed brass-finish plated steel liner | |
| Glass-to-base connectors | Stainless steel clamping fasteners | |
| Base floor glides | Non-marking rubber pads | |
| Exterior base finish | Epoxy polyester powder coating, 60 um thickness | |
| Interior brass finish | Brushed PVD plated finish, 10 um thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Mobility | Fixed non-caster design with rubber floor glides | |
|---|---|---|
| Storage | No enclosed storage compartments, open hollow center design | |
| Surface use | Smooth non-porous glass top for drink and decor placement | |
| Assembly requirement | Knock-down assembly connecting glass top to pre-built base | |
| Floor protection | Non-marking glides prevent scuffing on hard flooring and low-pile carpet | |
| Design feature | Central open cutout creates decorative void for curated display objects | |
| Stability | Curved split-base design provides three-point floor contact for level placement | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room | Centered in front of sofas for drink, book and decorative display | |
|---|---|---|
| Hotel lounge areas | Used in public lobby seating zones as a modern accent piece | |
| Showroom and model home staging | Highlighted as a luxury contemporary design statement piece | |
| Executive lounge spaces | Placed in informal office reception waiting areas for guest use | |
| Modern apartment interiors | Suited for open-plan living spaces with minimalist decor schemes |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12150-1:2015 | Applicable to thermally toughened soda lime silicate safety glass for furniture | |
|---|---|---|
| EN 15372:2008 | Applicable to strength, durability and safety requirements for domestic tables |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 32487-2016 | Applicable to glass furniture general technical requirements for home use | |
|---|---|---|
| GB/T 3324-2017 | Applicable to general technical requirements for wooden/metal furniture | |
| GB 15763.2-2005 | Applicable to safety glass requirements for tempered glass used in furniture |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 32487-2016: Applicable to glass furniture general technical requirements for home use; 2. GB/T 3324-2017: Applicable to general technical requirements for wooden/metal furniture; 3. GB 15763.2-2005: Applicable to safety glass requirements for tempered glass used in furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool