| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall set dimensions (nested) | 1300 x 710 x 470 mm | |
|---|---|---|
| main oval table top size | 1300 x 710 mm | |
| main table top thickness | 12 mm | |
| side table top size | 650 x 450 mm | |
| side table height | 580 mm | |
| central spherical accent diameter | 180 mm | |
| base floor plate thickness | 8 mm | |
| floor clearance under table top | 458 mm | |
| base leg section width | 60 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| main table total static load capacity | 100 kg | |
|---|---|---|
| total set net weight | 45 kg | |
| surface heat resistance | 120 °C | |
| surface scratch resistance | 6 Mohs | |
| floor protection pad load rating per pad | 25 kg | |
| recommended maximum number of users | 4 | |
| finish coating durability (indoor use) | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| main table top | 12mm tempered glass or polished sintered stone | |
|---|---|---|
| side table top | 10mm tempered clear glass | |
| frame and legs | 1.5mm thick polished black chrome plated carbon steel | |
| central decorative sphere | Polished black chrome plated solid metal | |
| floor contact pads | 5mm thick non-slip silicone rubber | |
| surface finish | Mirror polished electroplated black chrome coating | |
| frame weld joints | TIG welded ground smooth joints | |
| underside top support | 20mm wide metal perimeter support rail | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| nesting configuration | Side table slides fully under main table overhang for space saving | |
|---|---|---|
| separate use capability | Side table can be positioned independently as an end table next to seating | |
| floor protection | Silicone pads prevent scuffs on hard floors and carpets | |
| stable cantilever support | Curved dual-leg base eliminates tipping under full rated load | |
| easy surface cleaning | Non-porous polished top wipes clean with standard household cleaners | |
| no integrated storage | Open base design provides no enclosed drawer or shelf storage | |
| fixed height design | No height adjustment, tilt, or mobility mechanisms | |
| decorative weight distribution | Central sphere acts as a structural stiffener for dual leg assembly | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| living room sofa front placement | Positioned in front of 3-seat upholstered sofas for drinks and decor | |
|---|---|---|
| small apartment space saving | Nesting design reduces footprint when extra surface is not needed | |
| modern light luxury interiors | Polished metal and glass finish matches contemporary glam, modern design schemes | |
| show home and model unit staging | Sculptural base acts as a decorative focal point for interior displays | |
| side table flexible placement | C-shaped side table slides next to armchairs for laptop or snack use | |
| low-pile carpet and hard floor use | Flat base pads work safely on tile, wood and carpeted surfaces |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 15372:2008 | Furniture - Mechanical safety requirements for tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for finish durability checks | |
|---|---|---|
| GB/T 4893.1-2021 | Surface wear resistance test for furniture coatings, applicable for metal finish | |
| GB 15763.2-2015 | Safety standards for tempered glass used in furniture, applicable for glass tops |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for finish durability checks; 2. GB/T 4893.1-2021: Surface wear resistance test for furniture coatings, applicable for metal finish; 3. GB 15763.2-2015: Safety standards for tempered glass used in furniture, applicable for glass tops; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
