| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1350 x 700 x 450 mm | |
|---|---|---|
| Table top thickness | 18 mm | |
| Gold apron height | 270 mm | |
| Black plinth base height | 160 mm | |
| Black plinth base width | 1080 mm | |
| Black plinth base depth | 560 mm | |
| Corner radius | 60 mm | |
| Floor clearance under apron | 20 mm | |
| Vertical rib detail width | 25 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed top static load capacity | 60 kg | |
|---|---|---|
| Net product weight | 80 kg | |
| Scratch resistance (stone top) | 6 Mohs | |
| Heat resistance (stone top) | 180 °C | |
| Gold finish tarnish resistance | 1000 hours salt spray | |
| Recommended maximum place setting/object count | 8 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table top | 18mm polished white veined sintered stone | |
|---|---|---|
| Gold apron | 1.2mm thick stainless steel with PVD polished gold finish | |
| Plinth base | High-gloss black lacquered MDF substrate with sealed edges | |
| Internal support frame | 1.5mm thick powder-coated carbon steel | |
| Floor protection pads | 5mm thick non-slip silicone pads | |
| Apron corner joinery | Mitered welded metal joints with polished finish | |
| Top bonding adhesive | Structural epoxy adhesive | |
| Plinth surface coating | 0.15mm thick UV-cured high-gloss lacquer | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Fixed plinth construction | Static non-adjustable structure with no moving parts | |
|---|---|---|
| Floor protection | Underside silicone pads prevent hard contact with hard flooring | |
| Wipe-clean surface | Non-porous stone and sealed metal surfaces resist liquid staining | |
| Rounded edge safety | Softly rounded top and apron corners eliminate sharp impact points | |
| Stable low center of gravity | Wide recessed plinth base prevents tipping under uneven top loading | |
| No integrated storage | Solid block construction without drawers, shelves or lift mechanisms | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Positioned in front of standard 3-seat or L-shaped sectional sofas for beverage and decor placement | |
|---|---|---|
| Luxury apartment common areas | Matches contemporary light luxury interior palettes with gold and neutral finishes | |
| Show home staging | Serves as a focal point for modern high-end residential display settings | |
| Hotel lounge areas | Suitable for upscale boutique hotel public seating areas with low-profile seating | |
| Executive lounge spaces | Complements modern office breakroom and VIP lounge seating arrangements |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Residential furniture strength, durability and safety requirements for tables | |
|---|---|---|
| EN 13722:2004 | Furniture surface resistance to cold liquids for daily use | |
| EN 15187:2006 | Assessment of furniture surface resistance to dry heat exposure |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to plinth base construction | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard for furniture, applicable if engineered wood is used in plinth | |
| GB 28007-2011 | Children's furniture safety, applicable for rounded corner compliance in households | |
| GB/T 15102-2017 | Laminated decorative panels, applicable for finish surface performance requirements |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to plinth base construction; 2. GB/T 4897.3-2015: Particleboard for furniture, applicable if engineered wood is used in plinth; 3. GB 28007-2011: Children's furniture safety, applicable for rounded corner compliance in households; 4. GB/T 15102-2017: Laminated decorative panels, applicable for finish surface performance requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
