| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (fully extended) | 1100 x 810 x 457 mm | |
|---|---|---|
| Large table top diameter | 810 mm | |
| Large table total height | 457 mm | |
| Large table top thickness | 18 mm | |
| Large table gold edge trim width | 15 mm | |
| Small table top diameter | 650 mm | |
| Small table total height | 400 mm | |
| Small table top thickness | 18 mm | |
| Metal leg rod diameter | 12 mm | |
| Base leg spread (per table) | 600 mm | |
| Adjustable foot pad diameter | 20 mm | |
| Nesting overlap depth | 350 mm | |
| Floor clearance under large table apron | 410 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall |
Net weight / load capacity / users / durability
| Large table top distributed static load | 50 kg | |
|---|---|---|
| Small table top distributed static load | 30 kg | |
| Set total net weight | 45 kg | |
| Frame joint static load rating | 80 kg | |
| Surface heat resistance | 120 °C | |
| Surface abrasion resistance | 2000 cycles | |
| Frame rust resistance service life | 5 years | |
| Recommended maximum user weight for temporary seating | 100 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table top substrate | High-density fiberboard core with black marble-veined laminate | |
|---|---|---|
| Small table top substrate | High-density fiberboard core with matching black marble-veined laminate | |
| Table top edge trim | 0.8mm thick polished gold stainless steel band | |
| Leg and frame construction | 12mm diameter carbon steel rod with titanium gold PVD plating | |
| Frame joint fabrication | TIG welded connections at leg and crossbar intersections | |
| Leveling foot pads | Non-slip polypropylene pads with adjustable screw thread | |
| Top surface finish | High-gloss UV-cured clear coat | |
| Metal surface treatment | Electroplated baked gold finish with anti-tarnish clear lacquer | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Small table slides 350mm under the large table to reduce footprint by 40% when not in use | |
|---|---|---|
| Independent use capability | Both tables function as standalone side/end tables when separated | |
| Leveling adjustment | Each leg has a 10mm adjustable screw foot to compensate for uneven floors | |
| Surface maintenance | Non-porous glossy top wipes clean with a damp cloth, no sealing required | |
| Floor protection | Polypropylene foot pads prevent scratches on hardwood, tile and carpeted floors | |
| Assembly requirement | Leg frames attach to table top aprons with included hex screws, no special tools needed | |
| Weight distribution design | Three-point triangular base distributes load evenly to prevent tipping | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Primary residential use | Living room placement directly in front of upholstered sofas for drinks, books and decor | |
|---|---|---|
| Small space application | Studio apartments, compact condos and open-plan lofts with limited floor space | |
| Commercial lounge use | Hotel lobbies, co-working waiting areas and boutique reception zones | |
| Bedroom accent use | Small table can be used as a bedside side table for lamps and personal items | |
| Recommended pairing | Works with 3-seater to L-shaped sofas with seat heights of 450 mm | |
| Surface use recommendation | Supports table lamps, decorative plants, beverage service, reading materials and remotes | |
| Flooring compatibility | Safe for hardwood, laminate, tile, and low/medium pile carpet when leveling feet are adjusted |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, applies to structural stability | |
|---|---|---|
| EN 15187:2006 | Furniture – Assessment of surface resistance to dry heat, applies to top heat tolerance | |
| EN 15185:2006 | Furniture – Assessment of surface abrasion resistance, applies to finish durability checks |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to table top substrate performance | |
|---|---|---|
| GB/T 4893.8-2013 | Surface wear resistance test for furniture finishes, applicable to top coating durability | |
| GB/T 4893.1-2021 | Surface resistance to cold liquids, applicable to stain resistance verification | |
| GB/T 17657-2013 | Test methods for wood-based panels, applicable to substrate physical performance checks |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to table top substrate performance; 2. GB/T 4893.8-2013: Surface wear resistance test for furniture finishes, applicable to top coating durability; 3. GB/T 4893.1-2021: Surface resistance to cold liquids, applicable to stain resistance verification; 4. GB/T 17657-2013: Test methods for wood-based panels, applicable to substrate physical performance checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
