| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 1700 x 800 x 460 mm | |
|---|---|---|
| Tabletop thickness | 18 mm | |
| Left U-shaped metal leg section width | 50 mm | |
| Left metal leg wall thickness | 1.5 mm | |
| Horizontal metal cross-stretcher width | 30 mm | |
| Right marble plinth base length | 700 mm | |
| Right plinth base depth | 800 mm | |
| Right plinth base height | 420 mm | |
| Floor clearance under left table section | 442 mm | |
| Tabletop corner radius | 30 mm | |
| Metal edge trim thickness on plinth | 2 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Product net weight | 78 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 80 kg | |
| Point load at table center | 30 kg | |
| Recommended maximum number of users | 6 | |
| Surface water resistance rating | IPX4 | |
| Metal frame anti-corrosion durability | 1000 hours | |
| Stone surface abrasion resistance | 6000 revolutions | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | Polished book-matched Pandora-style natural stone slab with grey/white veining | |
|---|---|---|
| Left support frame | Stainless steel with brushed gold PVD finish, formed into cantilever U-shape | |
| Horizontal cross-stretcher | Brushed gold PVD stainless steel tube, connected between left U-leg vertical sections | |
| Right plinth core | High-density MDF structural core, clad in matching veined stone panels | |
| Plinth edge trim | Brushed gold PVD stainless steel trim wrapping all stone plinth panel edges | |
| Underside support structure | Powder-coated steel support rails bonded to stone tabletop underside | |
| Floor contact pads | Non-slip scratch-resistant rubber pads fitted to all base bottom edges | |
| Tabletop edge finish | Hand-polished smooth rounded edge with zero sharp corners | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Structural load distribution | Asymmetric dual-base design transfers load evenly between left cantilever leg and right plinth | |
|---|---|---|
| Surface cleaning function | Non-porous polished stone surface allows wipe-clean maintenance for spills and dust | |
| Floor protection function | Hidden rubber contact pads prevent hard metal/stone contact scratching soft flooring | |
| Assembly requirement | Semi-knocked-down assembly requiring attachment of left leg and plinth to tabletop with included hardware | |
| Placement function | Low-profile height optimized for placement in front of sofas and lounge seating | |
| Decorative display function | Flat, level stone top supports display of decor, trays, books and beverage service items | |
| Stability feature | Wide right plinth base eliminates tipping risk when weight is applied to table edges | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Centered in front of sofas or sectionals for beverage service and decorative display, sized for 6seat layouts | |
|---|---|---|
| Luxury lounge spaces | Used in high-end hotel lobbies, VIP lounges or club reception areas for premium aesthetic alignment | |
| Modern open-plan apartments | Fits minimalist/light luxury interior schemes with gold metal and natural stone material palettes | |
| Show home staging | Selected by interior designers for luxury property display to elevate perceived interior quality | |
| Low-height side seating areas | Placed next to lounge chairs in reading corners as a large accent surface for accessories | |
| Designer office reception areas | Used in high-end executive waiting zones to convey premium brand perception |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, applicable for structural testing | |
|---|---|---|
| EN 15186:2006 | Furniture surface resistance to cold liquids, applicable for stone tabletop stain resistance | |
| EN 1022:2018 | Furniture seating/table stability test method, applicable to asymmetric base stability verification |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for plinth core structural performance | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard/MDF requirements for furniture structural use, applicable to plinth internal core | |
| GB 6566-2010 | Radionuclide limits for natural stone building materials, applicable to marble/stone panels | |
| GB/T 1732-1993 | Paint film impact resistance test, applicable to metal finish durability verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for plinth core structural performance; 2. GB/T 4897.3-2015: Particleboard/MDF requirements for furniture structural use, applicable to plinth internal core; 3. GB 6566-2010: Radionuclide limits for natural stone building materials, applicable to marble/stone panels; 4. GB/T 1732-1993: Paint film impact resistance test, applicable to metal finish durability verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
