| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1300 x 700 x 550 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Left storage cabinet internal width | 400 mm | |
| Upper drawer internal dimensions | 320 x 380 x 120 mm | |
| Lower drawer internal dimensions | 320 x 380 x 150 mm | |
| Middle open compartment dimensions | 450 x 380 x 300 mm | |
| Lower glass shelf thickness | 8 mm | |
| Steel frame tube cross-section | 40 x 20 mm | |
| Tea service recessed panel dimensions | 550 x 350 mm | |
| Electric kettle mounting cutout dimensions | 200 x 200 mm | |
| Floor clearance under lower shelf | 120 mm | |
| Leg footprint outer dimensions | 1240 x 640 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net product weight | 48 kg | |
|---|---|---|
| Tabletop static load capacity | 100 kg | |
| Recommended user capacity | 4 people | |
| Integrated kettle rated power | 1350 W | |
| Standard warranty period | 3 years | |
| Surface abrasion resistance | 2000 cycles | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 25mm high-density fiberboard core with black textured stone-look heat-resistant laminate, with integrated drain slot for tea waste water | |
|---|---|---|
| Support frame | 40x20mm rectangular carbon steel tube with matte black powder-coated finish, welded corner joints, angled geometric leg bracing | |
| Drawer fronts and side panel | 18mm medium-density fiberboard with walnut brown wood-look melamine finish, edge-banded for impact resistance | |
| Lower open shelf | 8mm clear tempered glass with polished edges, set into steel frame channels | |
| Drawer hardware | Zinc alloy polished silver bar pulls, full-extension ball-bearing drawer slides | |
| Recessed tea tray panel | Black textured phenolic resin panel with sloped drain channel and waste water outlet | |
| Adjustable foot pads | Nylon base adjustable leveling feet with 10mm adjustment range, fitted to bottom of each leg | |
| Integrated kettle set | Food-grade 304 stainless steel boiling pot and sterilization pot, BPA-free plastic water feed pipe | |
| Waste water bucket | Food-grade PP plastic bucket with metal handle, 5L capacity | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6 finish options |
Adjustment / rotation / tilt / mobility / storage features
| Built-in tea service system | Recessed drain tray connects via hidden silicone hose to lower shelf waste bucket, eliminating need for manual water draining during tea preparation | |
|---|---|---|
| Integrated electric kettle station | Cutout in tabletop mounts fully automatic kettle with auto water feed from 18.9L bottled water stored on lower shelf, supporting one-button boiling and cup sterilization functions | |
| Two-drawer storage | Left side fitted with two vertically stacked soft-close drawers for organized storage of tea leaves, utensils, cups and cleaning tools, accessed from the front seating side | |
| Enclosed side cabinet storage | Leftmost section behind wood-look panel provides enclosed storage space for larger tea accessories or spare supplies, accessed from the end of the table | |
| Open lower shelf storage | Full-width tempered glass lower shelf provides open storage for bottled water, waste bucket, tea boxes and serving accessories, with full visibility from seating positions | |
| Leveling adjustment | Four adjustable foot pads at leg bases allow 10mm height adjustment to compensate for uneven flooring, preventing wobble on tile or carpet | |
| Cable management | Hidden channel routes electric kettle power cord down through frame leg to floor outlet, eliminating exposed cords across the table surface | |
| Surface heat resistance | Tabletop laminate is rated for continuous contact with hot teapots up to 120°C, preventing surface damage from boiling water vessels | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 2 packages | |
|---|---|---|
| Main package carton dimensions | 1380 x 780 x 180 mm | |
| Accessory package carton dimensions | 650 x 450 x 280 mm | |
| Total shipping gross weight | 58 kg | |
| Total shipping volume | 0.278 CBM | |
| Required assembly time | 50 minutes | |
| 20ft GP container loading quantity | 92 units | |
| 40ft HQ container loading quantity | 225 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Office reception areas | Suited for executive reception rooms and lounge areas, supporting formal tea service for visiting clients while providing concealed storage for service supplies | |
|---|---|---|
| Residential living rooms | Suitable for open-plan home living spaces, functioning as both a coffee table and dedicated tea preparation station for daily home use | |
| Tea house private rooms | Appropriate for small private tea rooms, providing integrated water and drainage for uninterrupted tea service without additional side tables | |
| Small meeting breakout spaces | Usable in office breakout zones for informal meetings over tea, with sufficient surface space for documents alongside tea service equipment | |
| Recommended pairing | Matches well with 450mm seat height fabric or leather reception armchairs arranged along the long table edges, with clear leg room under the open frame | |
| Flooring compatibility | Safe for use on polished tile, laminate, engineered wood and low-pile carpet surfaces, with non-marking adjustable foot pads preventing floor scratches |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Furniture - Safety, strength and durability requirements for domestic and contract tables, applicable for structural load and stability testing | |
|---|---|---|
| EN 12521:2015 | Furniture - Strength, durability and safety requirements for domestic tables, applicable for long-term cyclic load testing of frame and shelves | |
| EN 60335-1:2012 | Safety standard for household electrical appliances, applicable for electrical safety of the integrated boiling water component |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional tolerance, edge finishing and structural stability verification of wood-based storage components | |
|---|---|---|
| GB/T 3325-2017 | General technical requirements for metal furniture, applicable for steel frame welding quality, coating adhesion and load capacity verification | |
| GB 4706.1-2005 | Safety requirements for household electrical appliances, applicable for the integrated electric kettle component electrical safety verification | |
| GB/T 4897.3-2015 | Requirements for particleboard and fiberboard used in furniture, applicable for formaldehyde emission verification of wood-based panel components |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for dimensional tolerance, edge finishing and structural stability verification of wood-based storage components; 2. GB/T 3325-2017: General technical requirements for metal furniture, applicable for steel frame welding quality, coating adhesion and load capacity verification; 3. GB 4706.1-2005: Safety requirements for household electrical appliances, applicable for the integrated electric kettle component electrical safety verification; 4. GB/T 4897.3-2015: Requirements for particleboard and fiberboard used in furniture, applicable for formaldehyde emission verification of wood-based panel components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
