| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Top Thickness | 45 mm | |
|---|---|---|
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 42 kg | |
|---|---|---|
| Single tabletop static load capacity | 50 kg | |
| Recommended maximum user weight for edge sitting | 100 kg | |
| Surface scratch resistance rating | 6 Mohs | |
| Surface heat resistance | 1200 °C | |
| Base floor contact point count | 4 per table | |
| Wobble threshold on flat surface | 0.5 mm | |
| Durability cycle for sliding nested movement | 10000 cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | 12mm polished white sintered stone | |
|---|---|---|
| Larger table support structure | Gunmetal grey carbon steel vertical slats | |
| Larger table lower base ring | Polished gunmetal carbon steel oval tubing | |
| Smaller table support structure | Gunmetal grey carbon steel ribbed drum frame | |
| Smaller table lower base ring | Powder-coated gunmetal carbon steel circular mesh ring | |
| Frame surface finish | Matte anti-corrosion powder coating | |
| Floor contact pads | Non-slip PE plastic feet | |
| Tabletop underside backing | 8mm high-density fiberboard support layer | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nested space-saving configuration | Smaller table slides fully under larger table to reduce footprint to 0.64 sqm | |
|---|---|---|
| Dual-surface flexible layout | Separable tables can be positioned independently for extra serving space during gatherings | |
| Non-porous easy-clean surface | Sintered stone top wipes clean with a damp cloth, resists liquid stains from drinks and food | |
| Scratch and heat resistant work surface | Hard sintered stone surface supports hot mugs, cold drinks and decorative items without damage | |
| Open-frame cable pass-through | Slatted metal base allows charging cables to pass freely for devices placed on the table | |
| Tool-free light repositioning | Lightweight individual tables can be moved by one adult without assembly adjustments | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room seating areas | Pairs with 3-seater sofas and armchairs to hold drinks, snacks and decor for daily use | |
|---|---|---|
| Small apartment open-plan spaces | Nested configuration saves floor space when full table area is not required | |
| Modern office reception and lounge areas | Sleek metal and stone aesthetic fits contemporary office waiting areas for guest refreshments | |
| Temporary event serving setup | Separable tables provide extra surface area for parties, viewings or small gatherings | |
| Studio and loft styled interiors | Minimalist open-frame design complements industrial, modern and Scandinavian decor schemes |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
