| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (fully extended) | 1800 x 800 x 450 mm | |
|---|---|---|
| Closed overall length (retracted) | 1100 mm | |
| Tabletop thickness | 18 mm | |
| Fluted base unit dimensions | 700 x 800 x 420 mm | |
| Vertical fluted rib width on base | 12 mm | |
| Bronze edge trim thickness | 2 mm | |
| Under-table clear knee height (open section) | 380 mm | |
| Extension travel length for sliding top | 700 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 91 kg | |
|---|---|---|
| Product net weight | 55 kg | |
| Surface scratch resistance rating | 3H | |
| Surface heat resistance threshold | 120 °C | |
| Recommended maximum supported users placing items | 4 | |
| Sliding extension mechanism cycle life | 10000 operations | |
| Base moisture content (wood components) | 10% | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | Engineered sintered stone with polished marble-effect finish | |
|---|---|---|
| Support leg (left section) | High-density composite wood with matte dark brown finish | |
| Right base main panel | Vertically fluted MDF with matte charcoal finish | |
| Edge and base trim | Brushed bronze-finish stainless steel | |
| Internal extension slides | Cold-rolled steel with anti-rust zinc plating | |
| Base bottom trim | Bronze metal skirting to protect floor contact | |
| Tabletop edge banding | Stone-matched sealed edge to prevent chipping | |
| Connector hardware | 12 mm diameter steel cam lock screws and dowels | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Length extension mechanism | Sliding twin-section top that extends 700 mm to expand surface area | |
|---|---|---|
| Fixed fluted base support | Closed ribbed base provides stable support for extended table section | |
| Open under-table space | Left section has open clearance for leg room or floor basket storage | |
| Low-profile seating height alignment | 450 mm table height matches standard sofa seat elevation for easy access | |
| Scratch-resistant tabletop finish | Smooth non-porous surface resists daily scuffs from cups and decor | |
| Floor protection design | Full perimeter bronze base skirting prevents direct wood/metal contact with floors | |
| Solid square block leg cross-section | 120 x 120 mm | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room center placement | Positioned in front of 4seat sofas for serving drinks and decor | |
|---|---|---|
| Modern luxury interior schemes | Complements upholstered curved sofas and textured neutral wall finishes | |
| Small to medium open-plan living areas | Retractable length adapts to compact spaces or expanded guest use | |
| Low-profile lounge and reception spaces | Suitable for upscale residential lounge or quiet office reception areas | |
| Recommended pairing | Matches light neutral upholstered sofas, textured wool area rugs and metal accent decor |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Furniture – Strength, durability and safety for domestic seating tables | |
|---|---|---|
| EN 12521:2015 | Furniture – Mechanical safety requirements for domestic tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to base wood components | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard for furniture use, applicable to structural composite base panels | |
| GB 18584-2001 | Indoor decoration material formaldehyde emission limit for wood furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to base wood components; 2. GB/T 4897.3-2015: Particleboard for furniture use, applicable to structural composite base panels; 3. GB 18584-2001: Indoor decoration material formaldehyde emission limit for wood furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
