| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (nested) | 1000 x 600 x 460 mm | |
|---|---|---|
| Larger table dimensions | 1000 x 600 x 400 mm | |
| Smaller nested table dimensions | 710 x 450 x 460 mm | |
| Tabletop thickness | 10 mm | |
| Steel frame leg section | 20 x 40 mm rectangular tube | |
| Steel frame wall thickness | 1.2 mm | |
| Drawer internal dimensions | 500 x 300 x 100 mm | |
| Under-table clearance (larger table) | 120 mm | |
| Nesting overlap depth | 300 mm | |
| Oval tabletop edge radius | 300 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 50 kg | |
|---|---|---|
| Table net weight (set) | 45 kg | |
| Frame finish abrasion resistance | 2000 cycles | |
| Tabletop heat resistance | 180 °C | |
| Anti-slip foot pad load per leg | 25 kg | |
| Recommended number of users | 4 | |
| Surface stain resistance rating | Grade 5 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Larger table top | 10mm matte sintered stone, polished rounded edges | |
|---|---|---|
| Smaller table top | 10mm dark matte sintered stone, polished rounded edges | |
| Support frame | Black carbon steel rectangular tube, electrostatic powder coated | |
| Storage cabinet body | E0-grade engineered wood, light matte white finish | |
| Drawer front panel | Engineered wood with matching light finish, recessed pull handle | |
| Drawer slides | Cold-rolled steel silent side-mount slides | |
| Foot pads | Non-slip TPE rubber pads, adjustable 5mm height | |
| Frame weld points | Fully ground and smoothed welds, matte black touch-up paint | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting operation | Smaller table slides linearly to nest partially under larger table | |
|---|---|---|
| Drawer storage | Single pull-out drawer on smaller table, soft-close action | |
| Layout flexibility | Tables can be separated and placed independently left/right or adjacent | |
| Surface protection | Non-porous sintered stone top resists scratches, heat and liquid spills | |
| Floor protection | Adjustable TPE foot pads compensate for uneven floors, prevents scuffs | |
| Weight distribution | Angled cross-braced frame prevents tabletop warping under uneven loads | |
| Cleaning access | 120mm under-table clearance allows robot vacuum access | |
| Edge safety | Fully rounded oval edges eliminate sharp corners | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Placed in front of 4seat sofas for drinks, decor and daily leisure use | |
|---|---|---|
| Small apartment space | Nesting design reduces footprint when extra surface area is not needed | |
| Modern minimalist interior | Two-tone black/white/stone finish matches contemporary light luxury decor schemes | |
| Reception lounge area | Suitable for small office reception or breakout areas for guest beverage service | |
| Open-plan studio space | Flexible split layout supports zoning between living and dining areas | |
| Recommended matching furniture | Pairs with 2400 mm long low two-tone media consoles |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables, applies to set | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating and tables - Determination of stability | |
| EN 13722:2004 | Furniture - Test methods for surface finishes of furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to cabinet components | |
|---|---|---|
| GB/T 3325-2017 | General technical requirements for metal furniture, applicable to steel frame | |
| GB 18584-2001 | Limit of harmful substances in wood furniture, applicable to engineered wood panels |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to cabinet components; 2. GB/T 3325-2017: General technical requirements for metal furniture, applicable to steel frame; 3. GB 18584-2001: Limit of harmful substances in wood furniture, applicable to engineered wood panels; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
