| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 900 x 900 x 485 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| net weight | 18 kg | |
|---|---|---|
| distributed static tabletop load | 50 kg | |
| single-point leg static load | 80 kg | |
| surface abrasion resistance | 2000 cycles | |
| frame weld joint static load | 120 kg | |
| seating capacity suitability | 4 adults | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop substrate | 18mm MDF core | |
|---|---|---|
| tabletop surface | White marble-effect high-pressure laminate | |
| leg material | Carbon steel tube with matte black powder coating | |
| X-brace material | 8mm solid steel rod with black powder coating | |
| connecting hardware | Zinc-plated steel bolts and lock nuts | |
| foot pads | Non-marking TPE rubber caps | |
| coating thickness | 60 μm | |
| substrate moisture content | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| table surface function | Flat circular surface for beverage service, decor display and everyday living room use | |
|---|---|---|
| frame bracing function | Triple-rod X-stretcher distributes leg load and prevents frame wobble | |
| floor protection function | Rubber foot pads prevent floor scuffs, indentations and slip during use | |
| assembly mechanism | Bolt-together flat-pack construction with pre-drilled attachment points | |
| clearance access function | 100mm floor clearance allows robotic vacuum cleaners to pass under the table | |
| finish maintenance function | Stain-resistant laminate surface resists water rings and light scratches | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| living room primary use | Placement in front of 3-seat sofas or modular sectionals for beverage and decor service | |
|---|---|---|
| apartment small space use | Suitable for compact urban apartments and studio units | |
| lounge waiting area use | Installation in office breakout zones or small reception lounges | |
| balcony casual use | Placement on enclosed balconies for light refreshment service | |
| recommended pairing | Matched with low-profile fabric or leather sofas 450 mm seat height |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture for domestic use strength, durability and safety requirements for tables, applicable to structural load testing | |
|---|---|---|
| EN 13722:2004 | Furniture test methods for assessment of surface resistance to cold liquids, applicable to laminate top performance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop substrate and finish quality | |
|---|---|---|
| GB/T 3325-2017 | Metal furniture general technical requirements, applicable to steel frame strength and coating performance | |
| GB 18584-2001 | Indoor decorating and refurbishing materials limit of harmful substances for wooden furniture, applicable to formaldehyde emission limits |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop substrate and finish quality; 2. GB/T 3325-2017: Metal furniture general technical requirements, applicable to steel frame strength and coating performance; 3. GB 18584-2001: Indoor decorating and refurbishing materials limit of harmful substances for wooden furniture, applicable to formaldehyde emission limits; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
