| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Large table overall dimensions | 800 x 800 x 450 mm | |
|---|---|---|
| Small table overall dimensions | 600 x 600 x 400 mm | |
| Tabletop thickness | 12 mm | |
| Pedestal base floor contact diameter (large table) | 500 mm | |
| Pedestal base floor contact diameter (small table) | 400 mm | |
| Brass accent ring width | 20 mm | |
| Pedestal waist diameter (narrowest point) | 120 mm | |
| Edge profile thickness | 2 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total set net weight | 42 kg | |
|---|---|---|
| Large table distributed static load capacity | 50 kg | |
| Surface scratch resistance rating | Grade 6 | |
| Surface water absorption rate | 0.02% | |
| Metal base rust resistance coating thickness | 60 μm | |
| Recommended maximum weight per tabletop point load | 10 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop slab | Polished sintered stone, light grey marble-veined finish | |
|---|---|---|
| Pedestal upper cone | 1.5mm thick carbon steel, matte gunmetal powder coat | |
| Pedestal lower cone | 1.5mm thick carbon steel, brushed dark gunmetal finish | |
| Waist accent ring | Solid polished brass, PVD sealed to prevent tarnish | |
| Tabletop mounting plate | 3mm thick galvanized steel, pre-drilled for hardware | |
| Floor contact glides | Non-marking 5mm thick TPE rubber | |
| Connection hardware | Stainless steel M8 bolts and lock washers | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Nesting storage function | Smaller table slides fully under larger table to reduce footprint by 50% when not in use | |
|---|---|---|
| Independent use function | Both tables can be separated and used as standalone accent surfaces at different heights | |
| Surface maintenance feature | Non-porous sintered stone top wipes clean with dry or damp cloth, no sealing required | |
| Floor protection function | Integrated TPE glides prevent scuffing on hardwood, tile, and vinyl flooring, no additional pads needed | |
| Stability feature | Wide flared lower pedestal base lowers center of gravity to prevent tipping when items are placed on table edges | |
| Assembly process | Two-part pedestal joins at brass ring, top attaches via pre-installed mounting plate with included hex key | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room use | Place in front of sofas or sectionals to hold drinks, remotes, books, and small decor items | |
|---|---|---|
| Small apartment and studio use | Nesting design saves floor space when surfaces are not needed for entertaining | |
| Lounge and reception area use | Suitable for hotel lobbies, office waiting areas, and showroom seating zones | |
| Balcony casual seating area | Pair with low outdoor lounge chairs for light refreshment service (indoor rated only) |
EU Market Access Requirements* EN Standards
| Household furniture safety | EN 12521:2015 | |
|---|---|---|
| Surface emission testing | EN 16516:2017 |
Standards applicable to China-market projects
| Tabletop mechanical performance | GB/T 35166 | |
|---|---|---|
| Metal furniture coating performance | GB/T 3324 | |
| Furniture stability testing | GB/T 10357.7 |
This product must meet the following technical requirements: 1. Tabletop mechanical performance: GB/T 35166; 2. Metal furniture coating performance: GB/T 3324; 3. Furniture stability testing: GB/T 10357.7; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
