| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall closed dimensions | 900 x 900 x 460 mm | |
|---|---|---|
| Sintered stone top section dimensions | 450 x 900 mm | |
| Dark wood top section dimensions | 450 x 900 mm | |
| Sintered stone top thickness | 12 mm | |
| Table body plinth height | 460 mm | |
| Single drawer internal dimensions | 700 x 350 x 120 mm | |
| Drawer extension length | 350 mm | |
| Plinth base wall thickness | 18 mm | |
| Floor clearance under base | 0 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Table top static distributed load | 65 kg | |
|---|---|---|
| Single drawer maximum static load | 15 kg | |
| Net product weight | 65 kg | |
| Sintered stone surface abrasion resistance | 6000 cycles | |
| Surface water resistance rating | IPX4 | |
| Recommended maximum placed item height | 300 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| White veined top and side panels | 12mm matte sintered stone | |
|---|---|---|
| Dark matte tabletop panel | 18mm MDF substrate with dark oak wood veneer | |
| Drawer boxes (sides, base, back) | Solid pine wood | |
| Drawer front panels | 18mm matte black MDF | |
| Main structural cabinet body | E0-grade multilayer engineered wood | |
| Drawer sliding hardware | Full-extension cold-rolled steel side-mount slides | |
| Exterior finish coating | Matte UV-cured lacquer | |
| Bottom plinth layer | 18mm high-density fiberboard | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Two side-mounted pull-out storage drawers | Full extension, hold media, remotes, reading materials within body depth | |
|---|---|---|
| Sliding dual-section tabletop | Horizontally slides to expose additional hidden central storage compartment | |
| Full-extended table footprint | 1160 x 900 x 460 mm | |
| Drawer soft-close mechanism | Prevents slamming, reduces noise during daily residential use | |
| Non-porous sintered stone surface | Resists heat from mugs, stains from beverages, requires only damp cloth wiping | |
| Solid plinth base design | Eliminates leg wobble, distributes weight evenly across floor surface | |
| Flush-fit drawer fronts | Maintains seamless block aesthetic when drawers are fully closed | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room placement | Centered in front of sofas 3200 mm wide for beverages, books and decor | |
|---|---|---|
| Small apartment use case | Closed compact footprint suits 35sqm open-plan living spaces | |
| Modern minimalist interior fit | Matches monochrome, contemporary, wabi-sabi and light luxury decor schemes | |
| Hidden storage utility | Stores remote controls, magazines, coasters and small living room accessories out of sight | |
| Low-profile height design | Does not block TV sightlines when placed in front of media consoles | |
| Commercial lounge use | Suitable for office reception areas and boutique waiting areas with modern seating |
EU Market Access Requirements* EN Standards
| EN 15372:2008+A1:2016 | Safety, strength and durability for residential storage furniture | |
|---|---|---|
| EN 14749:2016 | Safety requirements for domestic kitchen and storage furniture hardware | |
| EN 13722:2004 | Test methods for surface resistance to cold liquids for furniture finishes |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural integrity and finish quality | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limit for wood-based panels, recommended for E0-grade substrate verification | |
| GB/T 4100-2015 | Ceramic tile/sintered stone standard, applicable for surface hardness and wear resistance | |
| GB/T 4893.4-2013 | Surface abrasion resistance test for furniture finishes, recommended for finish durability checks |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural integrity and finish quality; 2. GB 18580-2017: Formaldehyde emission limit for wood-based panels, recommended for E0-grade substrate verification; 3. GB/T 4100-2015: Ceramic tile/sintered stone standard, applicable for surface hardness and wear resistance; 4. GB/T 4893.4-2013: Surface abrasion resistance test for furniture finishes, recommended for finish durability checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
