| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 600 x 450 mm | |
|---|---|---|
| Upper tabletop thickness | 16 mm | |
| Lower shelf dimensions | 1100 x 550 mm | |
| Lower shelf height from floor | 250 mm | |
| Ground clearance under lower shelf | 150 mm | |
| Leg section diameter | 30 mm | |
| Corner radius | 30 mm | |
| Leg splay angle from vertical | 12 degrees | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total distributed static load capacity | 50 kg | |
|---|---|---|
| Product net weight | 14 kg | |
| Surface heat resistance | 120 °C | |
| Frame rust resistance service life | 3 years | |
| Surface abrasion resistance cycles | 2000 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upper tabletop substrate | 16mm thick particleboard core | |
|---|---|---|
| Upper tabletop finish | White grey-veined marble-effect high-gloss laminate | |
| Lower shelf substrate | 16mm thick particleboard core | |
| Lower shelf finish | Black marble-look matte laminate | |
| Leg and frame material | Powder-coated carbon steel tubing | |
| Frame cross bracing | 20mm diameter steel support bars | |
| Edge banding | PVC edge trim matching surface finish | |
| Connector hardware | Zinc-plated steel bolt and cam lock fittings | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Storage configuration | Two-tier open shelving, no enclosed drawers or doors | |
|---|---|---|
| Assembly requirement | Knock-down flat-pack assembly with included hardware | |
| Surface function | Stain-resistant smooth top supports drink service and decor display | |
| Stability design | Outward-slanted four-leg layout with cross bracing reduces wobble | |
| Mobility feature | Fixed non-caster design for permanent living room placement | |
| Clearance access | 150mm under-shelf clearance supports robotic vacuum access | |
| Safety design | Rounded table corners eliminate sharp edge impact risks | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Living room center placement | Positioned in front of sofas for drink service, book storage, and decor display | |
|---|---|---|
| Small apartment layout | Compact 1200mm length fits small to medium living room spaces without crowding | |
| Modern minimalist interior | Two-tone black and white marble finish complements contemporary, Nordic, and light luxury decor | |
| Open plan lounge use | Lower open shelf provides easily accessible storage for remote controls, magazines, and throws | |
| Residential rental furnishing | Durable laminate finish and low assembly cost suit long-term rental property furnishing |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety strength and durability requirements for domestic tables | |
|---|---|---|
| EN 14749:2016 | Safety requirements for domestic and kitchen storage furniture units | |
| EN 13722:2004 | Test methods for strength and durability of furniture table surfaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to panel components | |
|---|---|---|
| GB/T 4893.1-2021 | Surface wear resistance test method for furniture surfaces | |
| GB/T 17657-2013 | Test methods for evaluating physical and chemical properties of wood-based panels | |
| GB 28007-2011 | Safety requirements for children's furniture if used in family spaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to panel components; 2. GB/T 4893.1-2021: Surface wear resistance test method for furniture surfaces; 3. GB/T 17657-2013: Test methods for evaluating physical and chemical properties of wood-based panels; 4. GB 28007-2011: Safety requirements for children's furniture if used in family spaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
