| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Large table overall dimensions | 900 x 900 x 450 mm | |
|---|---|---|
| Small table overall dimensions | 600 x 600 x 400 mm | |
| Large table top thickness | 12 mm | |
| Small table top thickness | 12 mm | |
| Large table pedestal diameter | 280 mm | |
| Small table base diameter | 580 mm | |
| Nesting overlap clearance | 50 mm | |
| Floor to underside of large table | 438 mm | |
| Small table fluted ridge width | 15 mm | |
| Terracotta accent panel radius | 220 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Large table static distributed load | 136 kg | |
|---|---|---|
| Small table static distributed load | 90 kg | |
| Tabletop surface abrasion resistance | 4000 cycles | |
| Tabletop heat resistance threshold | 120 °C | |
| Total set net weight | 68 kg | |
| Floor pad static load per foot | 34 kg | |
| Recommended number of users | 4 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Large table top | Polished sintered stone with natural marble veining | |
|---|---|---|
| Small table top | Matching polished sintered stone with same marble pattern | |
| Large table pedestal | Matte off-white lacquered MDF cylinder | |
| Small table drum base main body | Grey lacquered vertically fluted MDF | |
| Small table curved side accent | Terracotta brown saddle leather wrapped panel | |
| Base bottom trim | Thin polished gold-toned metal edge strip | |
| Floor contact pads | Non-slip scratch-resistant felt pads | |
| Internal structural frame | E1 grade high-density MDF core | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Nesting configuration | Small table slides partially under large table to save 40% footprint | |
|---|---|---|
| Surface function | Waterproof stain-resistant polished top supports drinkware and decor | |
| Floor protection | Full perimeter felt base pads prevent scratches on hardwood and tile | |
| Stability design | Full-drum and thick pedestal bases eliminate wobble on level floors | |
| Layout flexibility | Tables can be separated for use as side tables or cocktail serving surfaces | |
| Surface care | Non-porous top resists liquid rings from cold and warm beverage containers | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room | Positioned in front of 3-seater sofas for drinks, snacks and decor display | |
|---|---|---|
| Apartment lounge area | Nesting function suits compact small-footprint open-plan living spaces | |
| Show home / sales office reception | High-end aesthetic pairs with leather upholstered seating for premium visitor areas | |
| Designer studio waiting area | Contemporary silhouette adds visual interest without overwhelming compact seating zones |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic tables, applicable for residential use | |
|---|---|---|
| EN 13722:2004 | Furniture surface performance test methods for coated and laminated tops |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to base frame and finishAcceptance inspection | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, applicable to MDF core materials | |
| GB/T 4897.3-2003 | Particleboard specification for furniture structural use, reference for internal framing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to base frame and finishAcceptance inspection; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, applicable to MDF core materials; 3. GB/T 4897.3-2003: Particleboard specification for furniture structural use, reference for internal framing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
