| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 630 x 630 x 1000 mm | |
|---|---|---|
| Seat height | 495 mm | |
| Inner seat width | 590 mm | |
| Inner seat depth | 520 mm | |
| Backrest height above seat | 505 mm | |
| Armrest height above seat | 180 mm | |
| Leg taper height | 430 mm | |
| Gold foot cap length | 50 mm | |
| Seat cushion thickness | 80 mm | |
| Leg splay outward angle | 12 degrees | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Recommended static load capacity | 150 kg | |
|---|---|---|
| Net weight per chair | 8 kg | |
| Seat foam density | 45 kg/m³ | |
| Seat foam rebound rate | 60% | |
| Upholstery abrasion resistance | 50000 Martindale cycles | |
| Frame static load rating per leg | 40 kg | |
| Seam stitch pitch | 8 stitches per 30 mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Front seat and back upholstery | Cream-colored faux leather | |
|---|---|---|
| Rear back panel upholstery | Dark brown faux leather | |
| Seat and back padding core | High-density polyurethane foam | |
| Internal support frame | 12 mm thick plywood seat pan | |
| Leg construction | 25 mm diameter powder-coated black steel tube | |
| Leg foot caps | Brass-finish gold metal with non-slip plastic glide | |
| Internal webbing support | 50 mm wide elastic webbing under seat foam | |
| Upholstery edge trim | Matching color stitched piping | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Seating support | Fixed rigid position with no recline, swivel or height adjustment | |
|---|---|---|
| Arm support | Integrated curved armrests merged with backrest for side support | |
| Floor protection | Non-marking glides at foot cap ends prevent floor scratching | |
| Cleaning performance | Wipe-clean faux leather surface resists water and common food stains | |
| Stacking capability | Non-stacking fixed frame design | |
| Arm clearance | 180 mm arm height fits under standard 750 mm high dining tables | |
| Structural stability | Outward-splayed four-leg base provides anti-tip support for regular use | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential dining room use | Pairs with standard 750 mm height dining tables for home meals | |
|---|---|---|
| Cafe and bistro seating | Light luxury finish suits modern casual dining and coffee shop settings | |
| Hotel restaurant and guest room use | Decorative two-tone design fits boutique hospitality common areas | |
| Home office accent seating | Works as a guest chair beside home desks with matching table height | |
| Show home and model apartment staging | Two-tone finish complements modern minimalist interior design schemes | |
| Event and banquet secondary seating | Fixed sturdy frame supports temporary event dining arrangements | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Domestic seating safety recommendation | EN 12520:2015 Furniture strength, durability and safety for domestic seating | |
|---|---|---|
| Upholstered furniture flammability recommendation | EN 1021:2014 Ignition resistance of upholstered furniture smouldering cigarette | |
| Surface finish durability recommendation | EN 12720:2009+A1:2013 Furniture assessment of surface resistance to cold liquids |
Standards applicable to China-market projects
| Domestic furniture safety recommendation | GB/T 3324General technical requirements for wooden furniture | |
|---|---|---|
| Upholstered furniture durability recommendation | GB/T 35607Test methods for durability of upholstered furniture seats | |
| Metal furniture coating recommendation | GB/T 3323Metal furniture general technical requirements | |
| Formaldehyde emission recommendation | GB 18584Indoor decorating materials limit of harmful substances |
This product must meet the following technical requirements: 1. Domestic furniture safety recommendation: GB/T 3324General technical requirements for wooden furniture; 2. Upholstered furniture durability recommendation: GB/T 35607Test methods for durability of upholstered furniture seats; 3. Metal furniture coating recommendation: GB/T 3323Metal furniture general technical requirements; 4. Formaldehyde emission recommendation: GB 18584Indoor decorating materials limit of harmful substances; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
