| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1520 x 1520 x 760 mm | |
|---|---|---|
| Tabletop diameter | 1520 mm | |
| Tabletop thickness | 25 mm | |
| Floor to tabletop underside clearance | 718 mm | |
| Pedestal base floor plate diameter | 680 mm | |
| Pedestal upper connection diameter | 320 mm | |
| Pedestal wall thickness | 3 mm | |
| Edge radius | 10 mm | |
| Clearance around full pedestal perimeter | 420 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 90 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 300 kg | |
| Recommended seating capacity | 6 persons | |
| Surface scratch resistance rating | 3000 abrasion cycles | |
| Base static floor load rating | 350 kg | |
| Surface stain resistance rating | Grade 4 | |
| Wobble deflection at table edge under 50kg point load | 2 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | High-density MDF core with engineered stone veneer | |
|---|---|---|
| Tabletop inlay | Light-colored resin or wood veneer crisscross geometric pattern | |
| Tabletop edge finish | Matte dark finished edge matching tabletop surface | |
| Pedestal column | Powder-coated matte black carbon steel conical column | |
| Floor base plate | Powder-coated matte black carbon steel circular plate | |
| Underside support bracket | Powder-coated black steel apron bracket | |
| Floor protection pads | Injection-molded non-slip PE plastic glides | |
| Fasteners | Zinc-plated steel M8 assembly bolts and brackets | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Seating access | Unobstructed 360-degree perimeter legroom with no corner legs | |
|---|---|---|
| Assembly requirement | Knock-down assembly connecting tabletop to pedestal and base plate | |
| Extendable function | Non-extendable fixed round tabletop | |
| Surface maintenance | Wipe-clean matte surface resistant to common food and liquid stains | |
| Floor protection | Non-marking glides prevent scratching hard flooring surfaces | |
| Weight distribution | Wide circular base plate distributes load evenly to prevent tipping | |
| Edge safety | Rounded smooth edge reduces impact injury risk | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Seats 6 people for daily family meals and casual entertaining | |
|---|---|---|
| Open-plan kitchen dining area | Minimalist silhouette fits modern open-concept kitchen layouts | |
| Small apartment dining nook | Single pedestal eliminates leg obstructions for flexible chair placement | |
| Café and bistro seating | Durable matte surface withstands high-frequency commercial use | |
| Modern office break room | Provides casual dining and collaboration seating for staff |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Domestic furniture strength, durability and safety requirements for dining tables | |
|---|---|---|
| EN 1022:2019 | Furniture seating stability test methods, applicable for tip resistance verification | |
| EN 13722:2004 | Furniture test methods for surface finish resistance to cold liquids |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for tabletop substrate quality | |
|---|---|---|
| GB/T 4893.4-2013 | Surface film adhesion test method for furniture surfaces | |
| GB/T 4893.8-2013 | Surface wear resistance test method for furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for tabletop substrate quality; 2. GB/T 4893.4-2013: Surface film adhesion test method for furniture surfaces; 3. GB/T 4893.8-2013: Surface wear resistance test method for furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
