| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2200 x 1000 x 750 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Base slat width | 30 mm | |
| Pedestal base length | 600 mm | |
| Pedestal base width | 450 mm | |
| Pedestal height | 730 mm | |
| Corner radius | 50 mm | |
| Under-table knee clearance height | 700 mm | |
| Floor clearance under base slats | 20 mm | |
| Slat spacing on pedestal | 25 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Static distributed tabletop load capacity | 300 kg | |
|---|---|---|
| Seating capacity | 8 people | |
| Stone surface heat resistance | 180 °C | |
| Surface stain resistance rating | Grade 5 | |
| Metal base anti-rust service life | 5 years | |
| Table net weight | 104 kg | |
| Footpad load per base | 57 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Polished veined white engineered stone/sintered stone | |
|---|---|---|
| Tabletop edge finish | Straight polished eased edge | |
| Pedestal slats | 1.2mm thick PVD gold-coated 304 stainless steel | |
| Base connection frame | Powder-coated steel internal support frame | |
| Tabletop-base connectors | M10 stainless steel expansion bolts | |
| Foot pads | Non-slip 5mm thick rubber pads | |
| Surface finish thickness | 0.1 mm PVD gold coating | |
| Stone surface sealant | Food-grade nano waterproof sealant | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Knock-down assembly required, bases attach to pre-drilled tabletop | |
|---|---|---|
| Leveling adjustment | Foot pads offer 10mm height adjustment for uneven floors | |
| Surface use suitability | Suitable for hot serving dishes, spills and daily dining use | |
| Structure type | Fixed non-extendable, non-height-adjustable rigid structure | |
| Floor protection | Rubber foot pads prevent scratches on hard flooring and rugs | |
| Cleaning requirement | Wipe clean with damp soft cloth, avoid abrasive cleaners | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Suitable for 8person formal family meals in open-plan or dedicated dining spaces | |
|---|---|---|
| Luxury apartment living space | Complements modern light luxury interior design with stone and gold finishes | |
| High-end hotel private dining room | Appropriate for small VIP function rooms serving 8 guests | |
| Luxury showroom display | Works as a centerpiece furniture display in high-end home furnishing showrooms | |
| Executive lounge hospitality area | Suitable for serving light refreshments in premium office hospitality zones |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface resistance to cold liquids |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture | |
| GB/T 4893.9-2013 | Test for surface heat resistance of furniture finishes |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture; 3. GB/T 4893.9-2013: Test for surface heat resistance of furniture finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
