| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (closed round) | 1350 x 1350 x 760 mm | |
|---|---|---|
| Extended oval dimensions | 1600 x 1200 mm | |
| Tabletop total thickness | 45 mm | |
| Central pedestal diameter | 180 mm | |
| Underside to floor clearance | 700 mm | |
| Extension leaf width | 400 mm | |
| Top overhang from pedestal | 585 mm | |
| Black edge trim thickness | 3 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Table net weight | 100 kg | |
|---|---|---|
| Distributed static load capacity | 150 kg | |
| Seating capacity (closed) | 6 persons | |
| Seating capacity (extended) | 8 persons | |
| Surface heat resistance | 180 °C | |
| Surface abrasion resistance | 4000 revolutions | |
| Extension mechanism cycle life | 10000 cycles | |
| Warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | High-density MDF core | |
|---|---|---|
| Top surface finish | 12mm polished sintered stone | |
| Edge trim | Black PVC/ABS edge banding | |
| Central pedestal | Thick-walled carbon steel tube | |
| Base finish | Black matte powder coating | |
| Extension mechanism hardware | Cold-rolled steel slides | |
| Leveling feet | Non-slip PP plastic feet | |
| Extension leaf core | Matching high-density MDF with stone finish | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Extension operation | Manual rotating split-top mechanism to reveal stowed leaf | |
|---|---|---|
| Leaf storage | Self-stowing leaf housed in concealed under-top compartment | |
| Surface maintenance | Stain-resistant non-porous top for easy wipe cleaning | |
| Floor leveling | Adjustable bottom feet to compensate for uneven floors | |
| Edge protection | Smooth rounded black trim prevents impact chipping | |
| Structural stability | Thick central pedestal provides wobble-free support on level floors | |
| Configuration conversion | Converts between 6-seat round and 8-seat oval in 2 minutes | |
| Anti-tip design | Central weighted pedestal prevents tipping under normal use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Domestic dining room | Fits open-plan and dedicated dining areas for 8person family meals | |
|---|---|---|
| Small apartment dining spaces | Closed round configuration saves space when not fully extended | |
| Open-concept living areas | Modern marble-look finish complements minimalist and light luxury interiors | |
| Event and hospitality use | Extended configuration supports small gatherings and dinner parties | |
| Matching chair sets | Pairs with upholstered dining chairs with dark frames and metal leg caps as shown | |
| Floor compatibility | Suitable for tile, wood and luxury vinyl flooring with protective leveling feet | |
| Recommended placement | Centered in dining zones with 800mm clearance around perimeter for seating access |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface finishes on furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to table structure | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard for furniture, applicable to core substrate verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to table structure; 2. GB/T 4897.3-2015: Particleboard for furniture, applicable to core substrate verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
