| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2200 x 1000 x 750 mm | |
|---|---|---|
| tabletop thickness | 50 mm | |
| tabletop edge overhang | 50 mm | |
| single leg panel width | 400 mm | |
| single leg panel thickness | 50 mm | |
| under-table knee clearance height | 690 mm | |
| leg setback from long edge | 300 mm | |
| leg setback from short edge | 400 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| net weight | 180 kg | |
|---|---|---|
| distributed static tabletop load | 250 kg | |
| seating capacity | 8 diners | |
| surface abrasion resistance | 4000 cycles | |
| finish warranty | 10 years | |
| metal leg wall thickness | 8 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| tabletop slab | Grand Antique black natural marble with white veining, polished finish | |
|---|---|---|
| tabletop edge | Beveled polished marble edge, radius 3mm | |
| support legs | Brushed dark bronze carbon steel solid vertical panels | |
| leg base trim | Angled cut bottom edge on each leg panel | |
| connecting hardware | Stainless steel M10 mounting bolts, anti-loosening washers | |
| surface sealant | Penetrating stone sealer, stain-resistant coating | |
| adjustable foot pads | Nylon non-slip leveling pads on leg bases | |
| undertop reinforcement | 18mm plywood backing panel under marble slab | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| structure type | Fixed non-extendable rectangular dining table, no folding mechanism | |
|---|---|---|
| seating access | Open unobstructed under-table space on all four sides | |
| leveling adjustment | 10mm vertical adjustment via foot pads for uneven floors | |
| assembly requirement | Flat-pack assembly, legs attach to undertop frame with included hardware | |
| surface maintenance | Sealed polished surface resists water and common food stains, periodic resealing required | |
| floor protection | Soft non-marking foot pads prevent scratches on hard flooring | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| residential dining room | Suitable for 8seat open-plan modern or luxury dining spaces | |
|---|---|---|
| open-plan kitchen diner | Matches minimalist and contemporary interior design schemes | |
| commercial hospitality | Suitable for high-end restaurant private dining rooms and hotel suites | |
| showroom display | Works as a statement piece for furniture and interior design showrooms | |
| executive lounge | Appropriate for premium office breakout and executive dining areas |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applicable for strength, durability and safety requirements for domestic dining tables | |
|---|---|---|
| EN 15185:2011 | Applicable for surface resistance to abrasion for furniture surfaces | |
| EN 15186:2011 | Applicable for surface resistance to scratching for furniture surfaces |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable for general technical requirements for wooden/stone furniture, dimensional stability | |
|---|---|---|
| GB 18584-2001 | Applicable for limit of harmful substances in interior decoration furniture materials | |
| GB/T 4897.3-2015 | Applicable for particleboard used in undertop reinforcement backing panels |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable for general technical requirements for wooden/stone furniture, dimensional stability; 2. GB 18584-2001: Applicable for limit of harmful substances in interior decoration furniture materials; 3. GB/T 4897.3-2015: Applicable for particleboard used in undertop reinforcement backing panels; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
