| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1400 x 800 x 750 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Tabletop overhang on long sides | 50 mm | |
| Tabletop overhang on short ends | 70 mm | |
| Under-table knee clearance height | 690 mm | |
| Leg frame vertical section width | 80 mm | |
| Lower horizontal support bar height | 80 mm | |
| Floor contact footprint length | 1260 mm | |
| Floor contact footprint width | 700 mm | |
| Edge profile thickness (finished edge) | 50 mm | |
| Seating space per diner (long side) | 600 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 45 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 150 kg | |
| Recommended seating capacity | 4 diners | |
| Surface heat resistance | 180 °C | |
| Surface scratch resistance | 6 Mohs | |
| Frame static load stability rating | 200 kg | |
| Adjustable foot adjustment range | 10 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | Matte dark sintered stone | |
|---|---|---|
| Tabletop backing | Fiberglass-reinforced support board | |
| Frame material | Powder-coated carbon steel tubing | |
| Frame wall thickness | 1.5 mm | |
| Frame surface finish | Matte black electrostatic powder coating | |
| Leveling feet | Nylon-tipped threaded steel inserts | |
| Assembly hardware | Zinc-plated steel bolts and allen key | |
| Joint connectors | Welded steel corner gussets | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Table structure | Fixed non-extendable, non-foldable rigid assembly | |
|---|---|---|
| Leveling function | Threaded adjustable feet on each leg contact point | |
| Surface maintenance | Wipe-clean non-porous tabletop surface | |
| Leg clearance design | Open cantilever frame without central obstruction | |
| Assembly requirement | Knock-down flat-pack assembly with included hardware | |
| Surface use compatibility | Heat-resistant surface supports hot serving dishes directly | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room use | Suitable for small to medium apartment dining spaces | |
|---|---|---|
| Open-plan kitchen dining use | Matches modern minimalist interior design schemes | |
| Small cafe or break room use | Appropriate for light commercial casual dining settings | |
| Recommended pairing | Coordinates with upholstered dining chairs with black metal legs | |
| Surface use case | Supports daily meals, casual work, and small serving displays |
EU Market Access Requirements* EN Standards
| Furniture safety requirement | EN 12521:2015 | |
|---|---|---|
| Surface scratch resistance | EN 15186:2012 | |
| Stability verification | EN 1730:2012 |
Standards applicable to China-market projects
| Tabletop dimensional tolerance | GB/T 3324 | |
|---|---|---|
| Surface coating adhesion | GB/T 4893.4 | |
| Frame structural stability | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Tabletop dimensional tolerance: GB/T 3324; 2. Surface coating adhesion: GB/T 4893.4; 3. Frame structural stability: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
