| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1400 x 800 x 750 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Support post diameter | 80 mm | |
| Floor base plate dimensions | 700 x 400 x 10 mm | |
| Under-table knee clearance height | 680 mm | |
| Tabletop corner radius | 20 mm | |
| Edge profile thickness overhang | 2 mm | |
| Support post spacing (center to center) | 500 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total product net weight | 85 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 200 kg | |
| Recommended seating capacity | 4 people | |
| Tabletop heat resistance threshold | 180 °C | |
| Stainless steel base wall thickness | 1.5 mm | |
| Standard product warranty | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | 12mm glossy white grey-vein sintered stone | |
|---|---|---|
| Support columns | Brushed 201# stainless steel cylindrical tubing | |
| Floor base plate | Brushed stainless steel flat plate with radiused corners | |
| Top mounting hardware | Zinc-plated steel M8 mounting bolts | |
| Floor glides | Adjustable nylon height-adjusting glides | |
| Tabletop edge finish | Polished eased edge matching top surface | |
| Surface finish coating (steel) | Brushed anti-fingerprint clear lacquer | |
| Under-table support frame | Concealed galvanized steel sub-frame | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Assembly method | Knock-down assembly with bolts connecting posts to base and top | |
|---|---|---|
| Height adjustment | 10mm adjustment via bottom nylon glides to level on uneven floors | |
| Surface maintenance | Non-porous sintered stone top allows wipe-clean with standard household cleaners | |
| Seating clearance | Full unobstructed leg clearance across full table length, no center apron blocking | |
| Customization option | Available in alternate lengths from 1200mm to 1800mm per project requirements | |
| Connection rigidity | Fixed welded joints between posts and base plate for zero wobble | |
| Floor protection | Nylon glides prevent scratching hard flooring surfaces without additional felt pads | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining space | Suitable for 4-person household dining rooms and small apartment eat-in kitchens | |
|---|---|---|
| Commercial restaurant seating | Suitable for casual dining restaurants, cafes, and hotel breakfast areas | |
| Office break room use | Suitable for employee pantry and break areas for shared meal use | |
| Open-plan living space | Fits modern minimalist and luxury interior design schemes | |
| Small event venue use | Suitable for banquet and event spaces needing stackable, easy-maintenance seating tables | |
| Showroom display use | Suitable for furniture showroom display paired with matching upholstered dining chairs |
EU Market Access Requirements* EN Standards
| Surface resistance to dry heat | EN 12721:2013 | |
|---|---|---|
| Table stability testing | EN 1730:2012 | |
| Surface abrasion resistance | EN 15185:2011 | |
| Tabletop surface abrasion resistance | Grade 4 (EN 438) |
Standards applicable to China-market projects
| Tabletop mechanical performance | GB/T 4100 | |
|---|---|---|
| Metal base structural safety | GB/T 3324 | |
| Formaldehyde emission | GB 18584 |
This product must meet the following technical requirements: 1. Tabletop mechanical performance: GB/T 4100; 2. Metal base structural safety: GB/T 3324; 3. Formaldehyde emission: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
