| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 2400 x 1000 x 760 mm | |
|---|---|---|
| Tabletop thickness | 51 mm | |
| Tabletop edge profile | 3 mm eased polished edge | |
| Under-table leg clearance height | 685 mm | |
| Individual pedestal base footprint | 350 x 600 mm | |
| Connection collar diameter | 80 mm | |
| End overhang from pedestal to table edge | 250 mm | |
| Side overhang from pedestal to table edge | 200 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 250 kg | |
|---|---|---|
| Product net weight | 116 kg | |
| Surface stain resistance rating | Grade 5 | |
| Surface scratch hardness (Mohs) | 6 | |
| Recommended maximum seating capacity | 8 persons | |
| Structural frame warranty period | 3 years | |
| Surface finish abrasion resistance (cycles) | 10000 | |
| Seating capacity clear width per person | 600 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | Polished dark sintered stone with natural veining, sealed finish | |
|---|---|---|
| Pedestal support frames | 1.5mm thick cold-rolled steel with gunmetal brushed finish | |
| Tabletop to base connection collars | Polished gunmetal stainless steel, welded mounting points | |
| Internal mounting hardware | Zinc-plated steel M10 bolts and lock washers | |
| Base bottom floor glides | 8mm thick non-slip TPE rubber pads | |
| Tabletop sealant coating | Food-safe nano-ceramic sealant, 20μm dry film thickness | |
| Pedestal internal bracing | 1.2mm thick steel cross supports welded inside pedestal shells | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Table configuration | Fixed non-extendable rectangular top, no leaf storage or extension hardware visible | |
|---|---|---|
| Under-table access | Open unobstructed legroom across full table span, no crossbars between pedestals | |
| Surface maintenance | Wipe-clean non-porous surface, resistant to daily food and drink spills | |
| Floor level adjustment | Threaded rubber glides on each base, 10mm vertical adjustment range | |
| Assembly requirement | Two-person knockdown assembly, bases attach to pre-drilled tabletop mounting points | |
| Floor protection | Non-marring rubber glides prevent scratches on hard flooring surfaces | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Suitable for 8-person formal or casual dining setups in modern luxury interiors | |
|---|---|---|
| Open-plan kitchen dining area | Low-profile double pedestal bases do not block sightlines in open living spaces | |
| Small commercial hospitality space | Polished durable surface suitable for boutique restaurant or private dining use | |
| Neutral color matching | Dark stone and gunmetal finish coordinates with gray, black and neutral upholstered dining chairs | |
| Hard flooring compatibility | Non-marring glides work on tile, hardwood, and polished concrete floors without damage |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables, applicable for performance testing | |
|---|---|---|
| EN 15372:2016 | Furniture - Requirements for surface durability, applicable for tabletop finish verification |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety testing | |
|---|---|---|
| GB/T 4893.9-2013 | Surface abrasion resistance test method for furniture finishes, applicable for tabletop durability | |
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture, applicable for emission compliance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety testing; 2. GB/T 4893.9-2013: Surface abrasion resistance test method for furniture finishes, applicable for tabletop durability; 3. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture, applicable for emission compliance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
