| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2000 x 1000 x 770 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Leg section size | 60 x 60 mm | |
| Leg wall thickness | 2 mm | |
| Under-table knee clearance height | 680 mm | |
| Under-table knee clearance depth | 940 mm | |
| Tabletop corner radius | 5 mm | |
| Leg inset from tabletop edge | 50 mm | |
| Adjustable foot pad height | 15 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total static distributed load capacity | 300 kg | |
|---|---|---|
| Surface temperature resistance | 1200 °C | |
| Surface Mohs hardness | 6 | |
| Seating capacity | 6 people | |
| Surface water absorption rate | 0.02% | |
| Net weight reference | 85 kg | |
| Powder coat finish durability | 1000 abrasion cycles | |
| Manufacturer warranty period | 1 year | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | AAA-grade matte white sintered stone | |
|---|---|---|
| Leg structure | Powder-coated black carbon steel | |
| Leg internal support | Reinforced welded steel cross bracing | |
| Tabletop mounting hardware | M8 zinc-plated steel screws | |
| Foot pads | Non-slip TPE adjustable glides | |
| Tabletop edge finish | Seamless polished sintered stone edge | |
| Surface finish layer | Nano anti-fingerprint matte coating | |
| Anti-rust treatment for legs | Electroplated base under powder coat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Structural configuration | Fixed non-extendable rectangular top | |
|---|---|---|
| Level adjustment | Rotatable TPE foot pads adjust 15mm for uneven floors | |
| Assembly requirement | Leg attachment to pre-drilled tabletop frame | |
| Surface cleanability | Non-porous surface wipes clean without sealant | |
| Floor protection | Soft TPE glides prevent hard floor scratches | |
| Seating access | Full open clearance on all four sides | |
| Edge safety | Rounded 5mm radius corners reduce impact injury | |
| Stability performance | Welded leg joints eliminate wobble at maximum load | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Seats 6 for family meals and casual gatherings | |
|---|---|---|
| Open-plan kitchen diner | Minimalist silhouette complements modern neutral interiors | |
| Small apartment open living area | Compact 1000mm depth saves floor space while seating 6 | |
| Commercial cafe private dining booth | Durable sintered stone surface withstands high daily use | |
| Recommended pairing | 6 slim-profile upholstered dining chairs (450mm seat height) | |
| Surface use suitability | Supports hot serveware, dining ware, and small decorative objects |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applies to domestic dining table strength, durability and safety requirements | |
|---|---|---|
| EN 15187:2006 | Applies to furniture surface resistance to cold liquid staining |
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
