| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Under-table knee clearance height | 710 mm | |
| Leg support section width | 50 mm | |
| Leg frame wall thickness | 1.5 mm | |
| Dual base spacing along length | 1100 mm | |
| Base footprint depth per U-frame | 650 mm | |
| Rounded corner radius | 10 mm | |
| Minimum clearance between leg and table edge | 150 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Static distributed tabletop load capacity | 250 kg | |
|---|---|---|
| Tabletop surface Mohs hardness | 6 | |
| Tabletop heat resistance | 1200 °C | |
| Tabletop water absorption rate | 0.2% | |
| Recommended seated diner capacity | 6 | |
| Net product weight | 68 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface layer | Matte white sintered stone | |
|---|---|---|
| Tabletop reinforcement substrate | 18mm thick high-density MDF | |
| Support frame and legs | Powder-coated matte black carbon steel | |
| Foot pads | Non-slip adjustable TPE floor glides | |
| Frame to top connectors | M8 carbon steel hex bolts with lock washers | |
| Edge finish | Hand-polished seamless sintered stone edge | |
| Surface finish coating on metal | 60 micron thick epoxy powder coat | |
| Tabletop stain resistance class | Class 5 | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Tabletop configuration | Fixed non-extendable rectangular surface | |
|---|---|---|
| Base leveling | Adjustable floor glides on each leg end | |
| Under-table access | Open unobstructed leg space across full center span | |
| Surface performance | Heat, scratch, and stain resistant tabletop | |
| Assembly structure | Knock-down flat pack assembly | |
| Floor protection | Non-marking glides prevent scuffing on hard floors and rugs | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Primary use for 6-person family meals and casual gatherings | |
|---|---|---|
| Open-plan kitchen dining zone | Sleek minimalist design complements modern open-plan interiors | |
| Small restaurant or cafe seating | Durable surface and stable base suitable for light commercial dining use | |
| Apartment dining nooks | 1800mm length fits compact urban dining spaces without overcrowding | |
| Show home or model unit staging | Contemporary black and white finish fits modern interior design schemes |
EU Market Access Requirements* EN Standards
| Domestic furniture tables safety requirements | EN 12521:2015 | |
|---|---|---|
| Furniture surface resistance to cold liquids | EN 12720:2013 | |
| Furniture surface resistance to dry heat | EN 12722:2013 |
Standards applicable to China-market projects
| Dining table dimensional stability | GB/T 3324 | |
|---|---|---|
| Furniture mechanical safety for tables | GB 28007 | |
| Furniture surface paint film performance | GB/T 4893.1 |
This product must meet the following technical requirements: 1. Dining table dimensional stability: GB/T 3324; 2. Furniture mechanical safety for tables: GB 28007; 3. Furniture surface paint film performance: GB/T 4893.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
