| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 1000 x 760 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Floor plate length | 1000 mm | |
| Floor plate width | 600 mm | |
| Floor plate thickness | 12 mm | |
| X-support column section | 80 x 40 mm | |
| Under-table knee clearance height | 680 mm | |
| Edge overhang from base perimeter | 300 mm | |
| Corner radius | 15 mm | |
| Floor clearance under base plate | 10 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 125 kg | |
|---|---|---|
| Static distributed tabletop load | 200 kg | |
| Recommended maximum diner capacity | 8 persons | |
| Surface Mohs hardness | 6 | |
| Surface heat resistance | 1200 °C | |
| Base finish corrosion resistance | 500 hours | |
| Wobble deflection at full load | 2 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | Matte marble-pattern sintered stone | |
|---|---|---|
| Tabletop substrate | 18mm high-density fiberboard backing | |
| Support frame | 2mm thick carbon steel X-brace | |
| Floor base plate | 12mm thick brushed bronze-lacquered steel | |
| Connection hardware | M10 zinc-plated steel bolts | |
| Edge finish | Hand-polished eased stone edge | |
| Foot levelers | Nylon-padded adjustable steel glides | |
| Finish coating | Anti-scratch bronze polyester powder coat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Full perimeter seating access | Unobstructed knee clearance around all four sides | |
|---|---|---|
| Floor leveling adjustment | ±10 mm vertical adjustment via integrated foot glides | |
| Surface stain resistance | Non-porous surface wipes clean without sealing | |
| Assembly requirement | Two-person bolt-together assembly of top to base | |
| Load distribution | X-brace transfers point loads evenly to floor plate | |
| Surface scratch resistance | Resists cutlery marks under normal dining use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Tabletop carton dimensions | 2500 x 1100 x 80 mm | |
|---|---|---|
| Base carton dimensions | 1050 x 650 x 150 mm | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Fits open-plan luxury dining spaces for family daily use | |
|---|---|---|
| Apartment open living area | Compact central pedestal saves floor space around perimeter | |
| Restaurant private dining room | High-end commercial setting for small group dining | |
| Show home display | Serves as focal point for luxury residential staging | |
| Executive lounge dining area | Premium staff dining space in upscale office environments | |
| Color coordination | Pairs with light taupe, off-white or cream upholstered dining chairs |
EU Market Access Requirements* EN Standards
| Domestic table safety | EN 12521:2015 | |
|---|---|---|
| Surface heat resistance | EN 12722:2013 | |
| Edge safety | EN 12520:2015 |
Standards applicable to China-market projects
| Table stability | GB/T 3324 | |
|---|---|---|
| Surface durability | GB/T 4893.4 | |
| Metal base coating | GB/T 1993 |
This product must meet the following technical requirements: 1. Table stability: GB/T 3324; 2. Surface durability: GB/T 4893.4; 3. Metal base coating: GB/T 1993; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
