| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Under-table knee clearance height | 680 mm | |
| Black pedestal base dimension per unit | 400 x 600 x 680 mm | |
| Central chrome support column diameter | 80 mm | |
| Pedestal U-cut knee opening height | 350 mm | |
| Pedestal U-cut knee opening width | 250 mm | |
| Tabletop edge overhang from base | 50 mm | |
| Chrome column wall thickness | 1.5 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Static distributed tabletop load capacity | 250 kg | |
|---|---|---|
| Seating capacity | 6 persons | |
| Surface heat resistance rating | 180 °C | |
| Surface scratch resistance rating | Mohs 6 | |
| Net product weight | 95 kg | |
| Leveling foot adjustment range | 10 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Sintered stone, matte light neutral finish | |
|---|---|---|
| Dual pedestal panels | 1.5mm thick carbon steel, matte black powder coat finish | |
| Central support column | Polished 201 stainless steel, mirror chrome finish | |
| Internal support frame under tabletop | 1.2mm thick galvanized steel bracing | |
| Pedestal base bottom trim | PVC edge banding, black finish | |
| Leveling feet | Nylon with stainless steel threaded insert | |
| Fastening hardware | Zinc-plated steel M8 bolts and washers | |
| Surface coating thickness on black pedestals | 80 μm | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Fixed non-extendable structure | Tabletop is permanently secured to base with no leaf extension mechanism | |
|---|---|---|
| Dual-sided knee access | U-shaped cutouts in both pedestals allow chair seating on both long sides | |
| Floor leveling adjustment | Threaded nylon feet at base of central column and pedestals compensate for uneven floors | |
| Surface stain resistance | Non-porous sintered stone top prevents liquid absorption and allows wipedown cleaning | |
| Knock-down assembly | Tabletop and base components ship flat for on-site attachment with included hardware | |
| Anti-tip structural design | Widely spaced pedestal bases lower center of gravity for stable placement | |
| Edge impact protection | Smooth rounded tabletop edges reduce injury risk from contact | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Seats 6 for daily family meals and casual gathering use | |
|---|---|---|
| Open-plan kitchen diner | Low-profile modern design complements contemporary minimalist kitchen schemes | |
| Small apartment dining area | 1800mm length balances seating capacity with space-efficient footprint | |
| Show home display setting | High-contrast black/chrome/neutral finish showcases modern interior styling | |
| Light commercial cafe seating | Durable stone surface supports frequent daily use in low-volume hospitality settings |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety, strength and durability requirements applicable to domestic dining tables | |
|---|---|---|
| EN 15187:2007 | Surface resistance to dry heat test applicable to horizontal dining surfaces | |
| EN 15186:2012 | Surface resistance to wet heat test applicable to dining table tops |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements applicable to domestic wooden/metal dining furniture | |
|---|---|---|
| GB/T 4893.4-2013 | Surface abrasion resistance test method applicable to finished furniture surfaces | |
| GB/T 4893.9-2013 | Surface impact resistance test method applicable to dining table tops |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements applicable to domestic wooden/metal dining furniture; 2. GB/T 4893.4-2013: Surface abrasion resistance test method applicable to finished furniture surfaces; 3. GB/T 4893.9-2013: Surface impact resistance test method applicable to dining table tops; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
