| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall assembled dimensions | 1300 x 1300 x 750 mm | |
|---|---|---|
| Tabletop diameter | 1300 mm | |
| Tabletop thickness | 12 mm | |
| Leg height | 738 mm | |
| Leg outer diameter (square profile) | 50 mm | |
| Leg wall thickness | 1.2 mm | |
| Knee clearance height under tabletop | 720 mm | |
| Leg inset from tabletop edge | 120 mm | |
| Foot pad diameter per leg | 30 mm | |
| Per-diner place setting width | 650 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Total product net weight | 45 kg | |
|---|---|---|
| Static distributed tabletop load capacity | 250 kg | |
| Recommended maximum seating capacity | 5 persons | |
| Tabletop material Mohs hardness | 8.5 | |
| Tabletop heat resistance | 1200 °C | |
| Surface scratch resistance | 3x higher than natural marble | |
| Finish durability rating | 20000 abrasion cycles | |
| Adjustable foot height adjustment range | 10 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop core | 12mm sintered stone, white matte finish | |
|---|---|---|
| Tabletop underside backing | 10mm honeycomb MDF reinforcing layer | |
| Support legs | Matte black powder-coated carbon steel hollow tubing | |
| Tabletop-to-leg mounting plates | 2mm thick galvanized steel, welded to leg tops | |
| Fastener hardware | M8 hex bolts with lock washers, zinc plated | |
| Foot pads | Non-marking TPE anti-slip adjustable glides | |
| Leg surface finish | 70μm thick matte black powder coating | |
| Tabletop edge finish | Hand-polished eased edge, no sharp corners | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Base structure | Fixed four-point slender leg support, no rotating or extendable features | |
|---|---|---|
| Leveling adjustment | Adjustable TPE feet rotate to compensate for uneven floor surfaces | |
| Surface maintenance | Non-porous tabletop wipes clean with damp cloth, no sealing required | |
| Assembly requirement | Knock-down assembly, legs attach to tabletop underside with included hardware | |
| Floor protection | Soft TPE foot pads prevent hard metal legs from scratching hard flooring | |
| Tabletop heat tolerance | Supports placement of hot cookware up to 1200°C without surface damage | |
| Stain resistance | Non-porous surface resists common food and beverage stains without discoloration | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining rooms | Serves 5 diners for daily family meals and casual entertaining | |
|---|---|---|
| Small apartment open-plan dining areas | Compact 1300mm diameter saves floor space while maintaining seating capacity | |
| Studio kitchen breakfast areas | Standard 750mm dining height pairs with armless dining chairs for casual use | |
| Short-term rental furnished properties | Durable scratch-resistant surface withstands high tenant turnover use | |
| Small cafe seating areas | Modern minimalist aesthetic fits casual contemporary food service interiors |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Strength, durability and safety standard for domestic dining tables | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating stability test reference for table pairing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to top backing panel | |
|---|---|---|
| GB/T 4893.4-2013 | Surface wear resistance test standard for furniture finishes | |
| GB 18584-2001 | Indoor decoration material hazardous substance limit standard for furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to top backing panel; 2. GB/T 4893.4-2013: Surface wear resistance test standard for furniture finishes; 3. GB 18584-2001: Indoor decoration material hazardous substance limit standard for furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
