| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Under-table knee clearance height | 680 mm | |
| Floor base plate dimensions | 900 x 500 x 15 mm | |
| C-pedestal wall thickness | 8 mm | |
| Tabletop edge radius | 15 mm | |
| Long-side leg setback | 450 mm | |
| Short-side leg setback | 200 mm | |
| Pedestal arc inner diameter | 420 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 136 kg | |
|---|---|---|
| Recommended seating capacity | 6 persons | |
| Net product weight | 90 kg | |
| Tabletop surface Mohs hardness | 6 | |
| Instant tabletop heat resistance | 300 °C | |
| Tabletop water absorption rate | 0.05% | |
| Base static stability load | 200 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | 12mm polished sintered stone with white-grey marble veining | |
|---|---|---|
| Tabletop edge finish | Honed and rounded polished sintered stone | |
| Pedestal support | 8mm thick gunmetal brushed stainless steel C-arc structure | |
| Floor base plate | 15mm thick black powder-coated carbon steel rectangular plate | |
| Joint connection hardware | M10 galvanized steel bolts with anti-loosening lock washers | |
| Floor contact pads | 5mm thick non-slip rubber adjustable glides | |
| Pedestal surface finish | Brushed gunmetal PVD coating for corrosion resistance | |
| Underside reinforcement | 20mm thick MDF backing board bonded to sintered stone | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Table type | Fixed non-extending rectangular dining surface | |
|---|---|---|
| Assembly type | Knock-down assembly with 8 connecting bolts between top, pedestal and base | |
| Seating access | Open C-base design provides unobstructed leg room on all four sides | |
| Floor protection | Adjustable rubber glides compensate for 10mm floor unevenness | |
| Surface performance | Stain, scratch and heat resistant tabletop suitable for hot dish placement | |
| Stability design | Wide rectangular base plate prevents tipping under offset tabletop loads | |
| Cleaning access | Smooth open understructure allows full floor cleaning around the base | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining rooms | Fits 6-seat dining layouts in open-plan or separate dining areas | |
|---|---|---|
| Apartment small dining zones | Compact single pedestal design saves floor space compared to 4-leg tables | |
| Modern minimalist interiors | Gunmetal base and marble-look top complement contemporary light luxury decor | |
| Cafe and bistro seating areas | Durable sintered stone top withstands high-frequency commercial dining use | |
| Show home and model apartment staging | Sleek sculptural form creates a high-end visual impression for display settings |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating stability test applicable to table leg clearance layout |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to backing board structural safety | |
|---|---|---|
| GB/T 4893.1-2021 | Furniture surface test for cold liquid resistance, applicable to sintered stone top |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to backing board structural safety; 2. GB/T 4893.1-2021: Furniture surface test for cold liquid resistance, applicable to sintered stone top; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
