| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (closed round) | 1500 x 1500 x 750 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Product net weight | 110 kg | |
|---|---|---|
| Maximum static tabletop load capacity | 150 kg | |
| Seating capacity (closed round) | 6 people | |
| Seating capacity (fully extended) | 8 people | |
| Tabletop surface scratch resistance rating | 6 Mohs | |
| Floor base static load rating | 300 kg | |
| Recommended warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface layer | Sintered stone slab with polished white marble-look finish | |
|---|---|---|
| Tabletop substrate | 18mm MDF structural backing board | |
| Pedestal column outer shell | 1.5mm thick matte black powder-coated steel plate | |
| Pedestal internal support frame | 40x40mm square steel tube internal bracing | |
| Floor base plate | 3mm thick matte black powder-coated steel hexagonal plate | |
| Extension leaf hardware | Cold-rolled steel sliding rail system with positive locking latches | |
| Table edge treatment | 1mm beveled polished stone edge | |
| Base bottom foot pads | 8mm thick non-slip adjustable PVC pads | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Extension mechanism operation | Two integrated leaves slide out from center pedestal to convert round top to oval | |
|---|---|---|
| Leaf lock function | Spring-loaded latches lock extended leaves in place to eliminate wobble during use | |
| Height leveling function | Adjustable foot pads on base plate correct uneven floors up to 10mm | |
| Surface maintenance function | Non-porous sintered stone surface resists common food stains and heat up to 180°C | |
| Space saving function | Single pedestal design removes obstructive legs around table perimeter for flexible seating | |
| Seating access function | 350mm table overhang allows 360-degree chair placement without leg interference | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room application | Formal dining spaces 25sqm for family meals and small gatherings | |
|---|---|---|
| Open plan living area application | Open concept kitchen-dining zones with modern luxury interior design | |
| Small commercial venue application | Private dining rooms in boutique restaurants or upscale cafes | |
| Recommended chair pairing | Upholstered dining chairs with black metal legs and gold tip details | |
| Flooring compatibility | Suitable for polished tile, marble, hardwood and vinyl plank flooring |
EU Market Access Requirements* EN Standards
| Furniture safety requirement | EN 12521:2015 Furniture - Strength, durability and safety for domestic dining tables | |
|---|---|---|
| Surface chemical resistance | EN 12720:2013 Furniture - Assessment of surface resistance to cold liquids |
Standards applicable to China-market projects
| Dining table dimensional tolerance | GB/T 3324General technical requirements for wooden furniture | |
|---|---|---|
| Surface durability requirement | GB/T 4893.4Furniture surface film adhesion test | |
| Structural stability requirement | GB/T 10357.1Furniture mechanical test for tables |
This product must meet the following technical requirements: 1. Dining table dimensional tolerance: GB/T 3324General technical requirements for wooden furniture; 2. Surface durability requirement: GB/T 4893.4Furniture surface film adhesion test; 3. Structural stability requirement: GB/T 10357.1Furniture mechanical test for tables; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
