| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1800 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Rounded corner radius | 50 mm | |
| Pedestal footprint (each) | 400 x 200 mm | |
| Under-table knee clearance height | 710 mm | |
| Pedestal setback from table ends | 200 mm | |
| Long-side leg clearance between pedestals | 1000 mm | |
| Edge profile thickness (polished) | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Static distributed tabletop load | 150 kg | |
|---|---|---|
| Seating capacity | 6 persons | |
| Surface heat resistance | 1200 °C | |
| Surface Mohs hardness | 6 | |
| Net product weight | 85 kg | |
| Warranty period | 2 years | |
| Surface stain resistance rating | Level 5 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface layer | 12mm veined white sintered stone | |
|---|---|---|
| Tabletop backing substrate | 18mm high-density MDF reinforcement | |
| Pedestal frame | 1.5mm thick matte dark carbon steel | |
| Base internal bracing | Square steel tube cross supports | |
| Tabletop edge finish | Polished rounded sintered stone match | |
| Base coating | Matte powder coat, rust-resistant | |
| Connection hardware | M8 zinc-plated steel bolts | |
| Floor protection pads | 5mm thick non-slip rubber pads | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Height configuration | Fixed 750mm standard dining height | |
|---|---|---|
| Extendability | Non-extendable fixed rectangular top | |
| Surface cleanability | Wipe-clean non-porous surface | |
| Stability design | Dual end pedestal weight distribution | |
| Seating access | Unobstructed leg room on all four sides | |
| Assembly requirement | Knock-down flat-pack assembly | |
| Edge safety | Rounded anti-collision corners | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room use | Seats 6people for daily family meals and casual gatherings | |
|---|---|---|
| Small open-plan kitchen dining area | Compact pedestal base maximizes leg room without blocking sightlines | |
| Modern apartment dining nook | Contemporary light luxury finish matches neutral and minimalist interiors | |
| Light commercial cafe seating | Durable stone surface withstands frequent daily use in public spaces | |
| Recommended pairing | Matches upholstered armless dining chairs with slim tapered legs for cohesive look | |
| Surface use case | Heat-resistant top supports hot serving dishes without additional trivets |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for surface resistance to cold liquids | |
| EN 15185:2011 | Furniture – Test for assessment of surface resistance to abrasion |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to substrate and assembly | |
|---|---|---|
| GB/T 4893.4-2013 | Surface abrasion resistance test for furniture finishes, applicable to tabletop | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to substrate materials |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to substrate and assembly; 2. GB/T 4893.4-2013: Surface abrasion resistance test for furniture finishes, applicable to tabletop; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to substrate materials; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
