| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 400 x 850 mm | |
|---|---|---|
| Tabletop thickness | 18 mm | |
| Tabletop edge trim width | 20 mm | |
| Pedestal base bottom footprint width | 600 mm | |
| Pedestal base bottom footprint depth | 380 mm | |
| Underside clearance at table ends | 690 mm | |
| Minimum underside clearance adjacent to pedestal | 100 mm | |
| Stepped pedestal tier count | 7 offset rectangular tiers | |
| Floor contact pad diameter | 30 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total static tabletop load capacity | 30 kg | |
|---|---|---|
| Net product weight | 45 kg | |
| Surface scratch resistance (tabletop) | 6 Mohs | |
| Metal base rust protection rating | Grade 2 indoor use | |
| Recommended maximum decor item weight per placement | 7 kg | |
| Anti-tip load safety factor | 1.5:1 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop slab | Polished light off-white sintered stone | |
|---|---|---|
| Tabletop edge trim | 1.2mm thick polished gold-tone stainless steel | |
| Pedestal structure | 1.5mm thick welded carbon steel with titanium gold PVD finish | |
| Internal support brackets | Powder-coated steel reinforcement plates | |
| Floor contact pads | Non-slip silicone rubber pads | |
| Weld joints | Ground and polished seamless welds | |
| Surface coating (metal) | Electroplated gold finish with anti-tarnish clear topcoat | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Decorative display surface | Flat rectangular top sized for table lamps, vases, books and small entry decor | |
|---|---|---|
| Freestanding stability | Wide offset stepped weighted base eliminates need for permanent wall mounting | |
| Floor protection | Bottom-mounted silicone pads prevent scratching polished tile, wood or stone floors | |
| Assembly requirement | Two-part knockdown assembly connecting tabletop to pedestal base with included hardware | |
| Surface maintenance | Non-porous sintered stone top wipes clean with dry or damp soft cloth, no sealing required | |
| Placement orientation | Designed for flush positioning against flat interior walls, rear edge sits flush to wall | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Marking note | Engineering for quotation, not supplier-measured value | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential entry hallway | Narrow profile fits flush against wall to display keys, lamps and decorative items without obstructing walkways | |
|---|---|---|
| Foyer/vestibule | Sculptural gold design serves as a focal accent piece for upscale home entry spaces | |
| Luxury living room sofa back | Positioned behind low-back sofas to display art, vases and framed photographs in open plan spaces | |
| Hotel corridor accent | Suited for high-end hospitality hallways to hold decorative lighting and floral arrangements | |
| Reception waiting area | Adds decorative accent space in boutique office or salon reception zones for light display items | |
| Recommended pairing | Match with oval/circular gold framed wall mirrors and neutral textured wall finishes for cohesive glam aesthetic |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Furniture - Strength, durability and safety for non-domestic storage tables | |
|---|---|---|
| EN 12520:2015 | Furniture - Strength, durability and safety for domestic seating and tables | |
| EN 1022:2018 | Furniture - Seating and tables - Determination of stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for top panel performance verification | |
|---|---|---|
| GB/T 1732-2020 | Determination of impact resistance of paint films, applicable for metal base finish testing | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for top panel performance verification; 2. GB/T 1732-2020: Determination of impact resistance of paint films, applicable for metal base finish testing; 3. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
