| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (W×D×H) | 900 × 600 × 1200 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Vertical leg column cross-section | 60 × 40 mm | |
| T-base caster spread (per leg) | 550 mm | |
| Minimum tabletop height from floor | 650 mm | |
| Maximum vertical lift travel | 550 mm | |
| Green modesty panel dimensions | 800 × 350 × 12 mm | |
| Caster wheel diameter | 50 mm | |
| Crank handle diameter | 80 mm | |
| Clear knee opening height (at minimum table height) | 620 mm | |
| Floor clearance under base crossbar | 30 mm | |
| Black edge trim thickness | 2 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net weight range | 18 kg | |
|---|---|---|
| Uniform static tabletop load capacity | 50 kg | |
| Modesty panel impact resistance | 10 J | |
| Caster dynamic rolling load rating (per wheel) | 25 kg | |
| Crank lift mechanism cycle life | 10000 cycles | |
| Powder coat finish abrasion resistance | 2000 cycles | |
| Laminated tabletop surface stain resistance rating | Grade 4 | |
| Stability tipping load at maximum height | 20 kg offset | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Worktop substrate | 18mm thick particleboard core | |
|---|---|---|
| Worktop surface finish | White melamine laminate | |
| Worktop edge treatment | 2mm thick black PVC edge banding | |
| Vertical support legs and T-bases | 2mm thick cold-rolled steel with epoxy polyester powder coat, off-white finish | |
| Green modesty panel | 12mm thick rigid MDF core with green matte powder-coated or laminated finish, steel mounting brackets | |
| Height adjustment crank mechanism | Zinc-plated steel leadscrew drive, glass-reinforced polyamide control knob | |
| Lift locking hardware | Hardened steel position lock with black powder-coated release lever | |
| Caster wheels | 50mm diameter nylon twin-wheel swivel casters, polyurethane tread, two casters with integrated brake locks | |
| Hardware fasteners | Zinc-plated steel bolts, barrel nuts, and assembly screws | |
| Adjustment mechanism internal bearings | Self-lubricating POM plastic guide bushings | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Manual crank height adjustment | Left-side mounted hand crank operates synchronized leadscrew drive to adjust table height between 650mm and 1200mm, locks automatically at set height when crank is stationary | |
|---|---|---|
| 360° swivel mobility | Four dual-wheel casters allow full omnidirectional repositioning on carpet and hard floors, enabling movement between workstations, meeting areas, or home office spaces | |
| Locking caster brakes | Two casters include step-on brake locks that prevent rolling when stationary, securing the table in position during active use | |
| Modesty panel privacy screening | Full-width green solid panel mounted between vertical legs blocks view of under-table leg area from front approach, suitable for open office and training environments | |
| Cantilever C-leg access clearance | T-shaped bases extend under seating areas with no central support obstruction, allowing users to pull a chair fully up to the table edge without base interference | |
| Tool-less assembly requirement | Knock-down flat pack design assembles with included hex key, no specialized power tools required for installation | |
| Surface level stability | Fixed rigid worktop maintains flat horizontal orientation across full height adjustment range, no tilt function included | |
| Low-friction height operation | Crank requires less than 25N turning force to adjust height under full rated load, enabling easy adjustment by all users | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Pack carton count | 1 unit | |
|---|---|---|
| Packed carton dimensions (L×W×H) | 1050 × 650 × 250 mm | |
| Packed gross weight | 18 kg | |
| Packed volume per unit | 0.18 CBM | |
| Assembly time | 50 minutes | |
| 20ft full container load quantity | 180 units | |
| 40ft HQ full container load quantity | 430 units | |
| Packaging material | 5-layer corrugated carton, EPS foam corner protection, polybag wrapping for components, hardware blister pack | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Open plan office touchdown workstations | Provides compact, repositionable sit-stand work surface for hot-desking and temporary work points, with modesty panel for user privacy in shared spaces | |
|---|---|---|
| Home office dual work setups | Rolls to sofas, beds, or existing desks for flexible laptop/monitor use, supports both seated and standing work positions without fixed installation | |
| Training room and seminar spaces | Mobile, height-adjustable design allows fast reconfiguration of room layouts for different session formats, lockable casters secure units during sessions | |
| Healthcare and clinical consultation spaces | Easy to move and wipe-clean surface supports adjustable height for seated or standing consultations, accessible for wheelchair users at lower height settings | |
| Educational classroom flexible learning areas | Durable steel frame and lockable mobility suit student project work, small group collaboration, and instructor demonstration stations | |
| Co-working space shared amenities | Compact footprint and easy mobility allow members to move tables between private booths and open areas as needed, matching flexible workspace operational needs | |
| Trade show and temporary event setups | Fast assembly, light weight, and rolling mobility support quick booth and pop-up display installation, adjusts for presenter standing or seated demonstration use |
EU Market Access Requirements* EN Standards
| EN 527-2:2002 | Applies to safety, strength and durability requirements for office work tables and desks, recommended for structural performance acceptance | |
|---|---|---|
| EN 527-3:2003 | Applies to test methods for stability and structural integrity of office desks, recommended for tip resistance testing at maximum height | |
| EN 15372:2016 | Applies to durability, strength and safety requirements for non-domestic furniture, recommended for commercial office deployment verification |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Applies to standard test methods for desk products, including static load, cycle, and stability tests for office work surfaces | |
|---|---|---|
| ANSI/BIFMA X5.9-2019 | Applies to caster durability and rolling performance requirements for office furniture casters, recommended for wheel life verification |
Standards applicable to China-market projects
| GB/T 3326-2016 | Applies to desk and table dimensional, physical and mechanical performance requirements for office furniture, recommended for stability and load verification | |
|---|---|---|
| GB/T 4893.8-2013 | Applies to surface wear resistance testing for laminated furniture surfaces, recommended acceptance for tabletop finish durability | |
| GB 28007-2011 | Applies to general safety requirements for children and adult office furniture, recommended for edge and tip-over safety verification |
This product must meet the following technical requirements: 1. GB/T 3326-2016: Applies to desk and table dimensional, physical and mechanical performance requirements for office furniture, recommended for stability and load verification; 2. GB/T 4893.8-2013: Applies to surface wear resistance testing for laminated furniture surfaces, recommended acceptance for tabletop finish durability; 3. GB 28007-2011: Applies to general safety requirements for children and adult office furniture, recommended for edge and tip-over safety verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
