| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1200 x 500 x 750 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Edge trim thickness | 2 mm | |
| Under-table knee clearance height | 700 mm | |
| Modesty panel dimensions | 1000 x 400 x 18 mm | |
| Frame leg tube section | 40 x 20 mm | |
| Caster wheel diameter | 50 mm | |
| Folded table storage depth | 160 mm | |
| Caster mounting spread width | 1100 mm | |
| Frame cross bracing height from floor | 250 mm | |
| Tabletop overhang on frame | 50 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Nett product weight | 18 kg | |
|---|---|---|
| Distributed tabletop static load capacity | 100 kg | |
| Per-caster static load rating | 30 kg | |
| Maximum nesting density in storage | 25 units per 10 linear meters | |
| Recommended number of users | 2 people | |
| Folding mechanism cycle life | 10000 cycles | |
| Surface abrasion resistance | 2000 cycles | |
| Surface static load deflection limit | 3 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface | White high-pressure laminate (HPL) over particleboard core | |
|---|---|---|
| Support frame | Light grey powder-coated rectangular steel tubing | |
| Modesty panel | Lime green melamine-faced MDF panel | |
| Edge trim | Black impact-resistant PVC edge banding | |
| Caster wheels | Black polyurethane twin-wheel casters, 2 with total lock brake | |
| Folding mechanism hardware | Zinc-plated steel pivot pins and hinges with black release lever | |
| Joint end caps | Black injection-moulded PP plastic caps | |
| Frame to panel fasteners | Zinc-plated steel screw fasteners | |
| Frame coating thickness | 60 micron epoxy polyester powder coat | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Flip-top folding operation | One-handed actuation of side-mounted black release lever folds tabletop to vertical position for compact storage and nesting | |
|---|---|---|
| Mobile caster movement | Four swivel casters allow 360-degree movement on all standard commercial floor surfaces, enabling single-person reconfiguration of room layouts | |
| Caster brake locking | Two lockable casters at the frame folding joint end lock both wheel rotation and swivel to prevent unintended movement during use | |
| Nested line storage | Vertical folded profile allows tables to be nested in tight rows to reduce storage footprint when not in use for training or events | |
| Cable management access | Pre-formed gap between tabletop underside and modesty panel allows routing of power and data cables for user laptops or training devices | |
| Ganging compatibility | Integrated frame alignment tabs allow adjacent tables to be connected in straight rows for larger training or classroom layouts | |
| Floor protection | Polyurethane caster material and plastic leg end caps prevent scratching of hard flooring and snagging of carpeted surfaces during movement | |
| Quick deployment | Tables can be unfolded and locked into use position in 10 seconds per unit, requiring no tools for setup or takedown | |
| Locking lever length | 120 mm | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 1 unit per carton | |
|---|---|---|
| Shipping carton dimensions | 1250 x 540 x 140 mm | |
| Gross shipping weight per carton | 20 kg | |
| Shipping volume per carton | 0.095 CBM | |
| Required assembly time | 10 minutes | |
| 20ft GP container loading quantity | 280 units | |
| 40ft HQ container loading quantity | 680 units | |
| Packaging materials | 5-layer corrugated carton, EPS foam corner protection, polyethylene film wrap, printed assembly guide and hardware kit | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Corporate training rooms | Suitable for flexible corporate training environments where room layouts require frequent reconfiguration between lecture, group work and open event setups | |
|---|---|---|
| Co-working and shared office spaces | Ideal for hot-desking and multi-purpose shared work zones, as tables can be stored away to create open floor space when not in use | |
| Educational classrooms and seminar spaces | Appropriate for school and university seminar rooms, exam halls and workshop spaces that require quick reconfiguration between different teaching formats | |
| Temporary event and conference venues | Suitable for pop-up conferences, trade show booths and temporary meeting spaces where fast setup and takedown is required | |
| Small meeting breakout zones | Usable as temporary work surfaces for small group meetings in office breakout areas, with sufficient load capacity for laptops, presentation materials and refreshments | |
| Recommended matching seating | Pairs with armless stackable training chairs to enable fully stowable, high-density room configurations when not in use |
EU Market Access Requirements* EN Standards
| EN 527-1:2011 Office furniture - Work tables and desks - Part 1: Dimensions | Applicable standards and test results require confirmation | |
|---|---|---|
| EN 527-2:2019 Office furniture - Work tables and desks - Part 2: Mechanical safety requirements | Applicable for structural stability, strength and safety testing of the folding mechanism and frame | |
| EN 1728:2012 Furniture - Seating - Test methods for strength and durability (applicable reference for horizontal surface loads) | Referenced for tabletop impact and cyclic load testing validation | |
| EN 13722:2004 Furniture - Test methods for the assessment of castor and wheel durability | Applicable for caster rolling wear and brake performance testing under expected use loads |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.5 Desk and Table Products |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable for tabletop and modesty panel dimensional stability, surface finish quality and edge bonding strength acceptance testing | |
|---|---|---|
| GB/T 3325-2017 General technical requirements for metal furniture | Applicable for steel frame welding quality, powder coat adhesion, structural strength and folding mechanism durability acceptance testing | |
| GB/T 10357.1-2013 Test of mechanical properties of furniture - Strength and durability of tables | Applicable for static load, impact and fatigue testing of the tabletop and frame structure for commercial use | |
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applicable standards and test results require confirmation |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable for tabletop and modesty panel dimensional stability, surface finish quality and edge bonding strength acceptance testing; 2. GB/T 3325-2017 General technical requirements for metal furniture: Applicable for steel frame welding quality, powder coat adhesion, structural strength and folding mechanism durability acceptance testing; 3. GB/T 10357.1-2013 Test of mechanical properties of furniture - Strength and durability of tables: Applicable for static load, impact and fatigue testing of the tabletop and frame structure for commercial use; 4. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applicable standards and test results require confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
