Light Oak Flip-Top Mobile Nesting Training Table with Modesty Panel (model FT-MOB-1200LO-GR) is listed under Flip Top Training Table, with overall dimensions of 1200 × 600 × 750 mm and main material of Particle‑board (PB). Load capacity: 136 kg. Certifications: Commercial,furniture,nesting,mobile,structure,flip-top,mechanism,light,oak,finish,grey,steel,frame. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| overall dimensions | 1200 x 600 x 750 mm | |
|---|---|---|
| tabletop thickness | 25 mm | |
| modesty panel height | 400 mm | |
| modesty panel thickness | 25 mm | |
| under-table knee clearance height | 680 mm | |
| under-table knee clearance depth | 560 mm | |
| caster diameter | 65 mm | |
| frame tubing wall thickness | 1.2 mm | |
| folded nested storage depth | 180 mm | |
| leg base spread width | 600 mm | |
| flip release lever length | 80 mm | |
| tabletop edge radius | 3 mm | |
| edge banding thickness | 2 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| static tabletop load capacity | 136 kg | |
|---|---|---|
| product net weight | 45 kg | |
| caster dynamic load rating per wheel | 34 kg | |
| flip mechanism cycle rating | 10000 cycles | |
| seating capacity | 2 people | |
| surface scratch resistance | 2000 cycles | |
| warranty period | 3 years | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| tabletop substrate | 25mm MDF core with thermal-fused light oak melamine laminate | |
|---|---|---|
| support frame | 1.2mm thick cold-rolled steel with grey powder-coated finish | |
| modesty panel | 25mm MDF with matching light oak melamine finish | |
| edge banding | 2mm thick impact-resistant PVC edge trim | |
| casters | Dual-wheel non-marring nylon swivel casters, two with locking brakes | |
| flip hardware | Zinc-plated steel pivot and latch assembly |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| flip-top operation | Side lever unlocks tabletop to tilt 90 degrees vertical for nesting | |
|---|---|---|
| nesting storage | Tables align in compact rows with 180mm nested depth when folded | |
| mobility and locking | Four swivel casters allow repositioning, two locking casters fix table in place | |
| table linking compatibility | Integral side connection points allow ganging multiple tables into rows |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| training room application | Suitable for corporate training rooms requiring quick room reconfiguration | |
|---|---|---|
| conference breakout use | Ideal for temporary meeting spaces and collaborative breakout zones |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Furniture – Strength, durability and safety for non-domestic tables | |
|---|---|---|
| EN 1335-2:2009 | Office furniture safety requirements for structural stability | |
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Office Furnishings – Desk Products, performance and safety standard |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop panel construction | |
|---|---|---|
| GB/T 3325-2017 | General technical requirements for metal furniture, applicable to steel frame construction | |
| GB/T 10357.1-2013 | Furniture mechanical performance test for tables, applicable for static load verification | |
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wood furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop panel construction; 2. GB/T 3325-2017: General technical requirements for metal furniture, applicable to steel frame construction; 3. GB/T 10357.1-2013: Furniture mechanical performance test for tables, applicable for static load verification; 4. GB 18584-2001: Indoor decoration material limit of harmful substances for wood furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp