| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set layout dimensions | 4800 x 3600 mm | |
|---|---|---|
| 3-seat sofa overall dimensions | 2400 x 950 x 930 mm | |
| Single armchair overall dimensions | 1200 x 830 x 910 mm | |
| Seat height from floor | 450 mm | |
| Seat depth for main seating | 700 mm | |
| Armrest height from seat | 200 mm | |
| Matching coffee table dimensions | 1400 x 800 x 450 mm | |
| Matching side end table dimensions | 600 x 600 x 550 mm | |
| Backrest cushion thickness | 160 mm | |
| Seat cushion thickness | 120 mm | |
| Wood trim cross-section thickness | 50 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total set net weight | 220 kg | |
|---|---|---|
| Per-seat static load capacity | 160 kg | |
| Total set seating capacity | 5 persons | |
| Seat foam density | 45 kg/m³ | |
| Foam rebound rate | 45% | |
| Frame static load rating | 750 kg | |
| Upholstery abrasion resistance | 50000 cycles | |
| Warranty period for structural components | 5 years | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Internal seating frame | Kiln-dried solid hardwood, moisture content <13%, anti-insect treated | |
|---|---|---|
| Seat support system | 3.8mm diameter serpentine steel springs + 50mm wide elastic webbing | |
| Seat cushion filling | High-density polyurethane foam, 120mm thickness, layered comfort pad | |
| Back cushion filling | High-density polyurethane foam with lumbar support layer, 160mm thickness | |
| Exterior upholstery | 2.0mm thick dark brown top-grain leather, stain-resistant topcoat | |
| Decorative trim and feet | Red-brown polished solid wood, clear lacquer finish | |
| Coffee table top | High-gloss natural wood grain veneer over engineered wood core | |
| Table base structure | Red-brown solid wood frame matching sofa trim finish | |
| Joinery hardware | Zinc-plated steel corner brackets with mortise and tenon wood joints | |
| Seam stitch specification | 8 stitches per inch, matching dark brown bonded nylon thread | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed non-reclining upright seating for formal guest reception | |
|---|---|---|
| Cushion design | Fixed non-removable attached seat and back cushions | |
| Surface protection | Stain and moisture resistant upholstery finish for easy daily cleaning | |
| Structural stability | Wide solid wood block feet for even weight distribution on carpet or hard floors | |
| Table function | Low central coffee table for refreshments and reading materials, side table for decor and beverages | |
| Acoustic comfort | Upholstered surfaces reduce ambient noise reflection in formal meeting spaces | |
| Arrangement flexibility | Fixed symmetric layout can be repositioned as individual pieces for different room sizes | |
| Durability design | Reinforced frame joint construction to prevent loosening after repeated commercial use | |
| Block foot height | 60 mm | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Executive office reception area | Formal symmetric layout for guest meetings and high-level visitor hosting | |
|---|---|---|
| Corporate lobby waiting space | Durable commercial construction supports high daily visitor traffic | |
| Government agency meeting lounge | Formal wood trim design aligns with official meeting space decor | |
| High-end private club lounge | Leather and wood finish conveys premium professional atmosphere | |
| Hotel business center guest seating | Matching table set supports refreshment service for waiting guests | |
| Recommended matching decor | Traditional ink-wash art, dark wood wall trim, light neutral carpet |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Domestic and contract furniture seating, stability test method applicable to all seating pieces | |
|---|---|---|
| EN 12520:2015 | Furniture strength durability safety requirements for contract non-domestic seating | |
| EN 15372:2016 | Contract furniture tables performance requirements for matching coffee and side tables |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Lounge and public seating safety and performance standard for commercial applications | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Desk and table products performance standard for matching occasional tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood trim and table components | |
|---|---|---|
| GB/T 16799-2008 | Technical specification for furniture leather, applicable to upholstery material acceptance | |
| GB 18584-2001 | Indoor decorating and refurbishing materials limit of harmful substances for wood furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood trim and table components; 2. GB/T 16799-2008: Technical specification for furniture leather, applicable to upholstery material acceptance; 3. GB 18584-2001: Indoor decorating and refurbishing materials limit of harmful substances for wood furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
